[OpenWrt-Devel] lantiq v3.18

[John Crispin]

On 12/02/2015 18:33, John Crispin wrote:
> 
> 
> On 12/02/2015 18:30, Daniel Gimpelevich wrote:
>> On Thu, Feb 12, 2015 at 8:54 AM, Daniel Gimpelevich 
>> <daniel at gimpelevich.san-francisco.ca.us 
>> <mailto:daniel at gimpelevich.san-francisco.ca.us>> wrote:
>> 
>> On Thu, Feb 12, 2015 at 3:19 AM, John Crispin
>> <blogic at openwrt.org <mailto:blogic at openwrt.org>> wrote:
>> 
>> 
>> 
>> On 10/02/2015 10:40, Daniel Gimpelevich wrote:
>>> Is there a patchset I could try?
>> 
>> try r44421 or newer
>> 
>> 
>> Tried initramfs, bootlog attached.
>> 
>> 
>> With this image, booting from SPI flash still fails, because
>> there is no longer a "kernel" partition, so the rootfs is now
>> /dev/mtdblock4, while the DTS file still specifies
>> /dev/mtdblock5.
> 
> and why does that cause booting to fail ?

ah i see, not even sure why we attach that info. the mtdsplid should
automatically set the root=

try removing the root= parameter please and see if it boots properly






> _______________________________________________ openwrt-devel
> mailing list openwrt-devel at lists.openwrt.org 
> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
> 
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel