[OpenWrt-Devel] [PATCH v4 2/4] [CC] ramips: Fix comment in rt3052 ethernet switch driver.

Vittorio G (VittGam) openwrt at vittgam.net
Thu Dec 31 18:00:05 EST 2015

Line 461 is actually enabling all switch ports by setting the disable bits
to 0. This needs to be done because the bootloader sets all ports to disabled
by default (which is the case for at least one router based on RT5350).

So, this patch fixes the comment in line 460.

Signed-off-by: Vittorio Gambaletta <openwrt at vittgam.net>

--- a/target/linux/ramips/files/drivers/net/ethernet/ralink/esw_rt3052.c
+++ b/target/linux/ramips/files/drivers/net/ethernet/ralink/esw_rt3052.c
@@ -457,7 +457,7 @@ static void esw_hw_init(struct rt305x_esw *esw)
 		      (RT305X_ESW_PORTS_ALL << RT305X_ESW_PFC1_EN_VLAN_S),
-	/* Enable Back Pressure, and Flow Control */
+	/* Enable all ports, Back Pressure and Flow Control */
 		      ((RT305X_ESW_PORTS_ALL << RT305X_ESW_POC0_EN_BP_S) |
 		       (RT305X_ESW_PORTS_ALL << RT305X_ESW_POC0_EN_FC_S)),
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org

More information about the openwrt-devel mailing list