[OpenWrt-Devel] Fwd: [PATCH] [imx6] Add U-BOOT Makefile option for i.MX6q SABRE board

Keno Fischer keno at juliacomputing.com
Sun Dec 27 13:44:26 EST 2015

U-BOOT ships with the `mx6qsabresd` configuration file to configure a bootloader
suitable for booting the Freescale i.MX6q SABRE evaluation board from SD card.
Expose this option in the uboot-imx6 Makefile.

Signed-off-by: Keno Fischer <keno at juliacomputing.com>

Resending this after fixing my subscription settings to openwrt-devel.
My apologies if you receive this twice.
This is my first patch submission to OpenWRT. Please let me know if
anything is incorrect.
I verified that this patch generates a usable bootloader for my SABRE board.

diff --git a/package/boot/uboot-imx6/Makefile b/package/boot/uboot-imx6/Makefile
index 7074da9..5a94913 100644
--- a/package/boot/uboot-imx6/Makefile
+++ b/package/boot/uboot-imx6/Makefile
@@ -64,6 +64,10 @@ define uboot/wandboard_solo
   TITLE:=U-Boot for the Wandboard Solo

+define uboot/mx6qsabresd
+  TITLE:=U-Boot for SABRE i.MX6Quad board
 UBOOTS := \
  nitrogen6dl \
  nitrogen6dl2g \
@@ -73,7 +77,8 @@ UBOOTS := \
  nitrogen6s1g \
  wandboard_dl \
  wandboard_quad \
- wandboard_solo
+ wandboard_solo \
+ mx6qsabresd

 define Package/uboot/template
 define Package/uboot-imx6-$(1)
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org

More information about the openwrt-devel mailing list