[OpenWrt-Devel] [PATCH v2 05/12] lantiq: ARV752DPW22 - fix dts file

Mathias Kresin openwrt at kresin.me
Thu Dec 24 07:28:50 EST 2015


No need to switch (and keep) on all leds at boot. Use the same led
logic and labels as the OEM firmware (red = okay, blue = failure).

Add the red internet led.

Signed-off-by: Mathias Kresin <openwrt at kresin.me>
---
 target/linux/lantiq/dts/ARV752DPW22.dts | 34 ++++++++++++---------------------
 1 file changed, 12 insertions(+), 22 deletions(-)

diff --git a/target/linux/lantiq/dts/ARV752DPW22.dts b/target/linux/lantiq/dts/ARV752DPW22.dts
index ec4a3ab..168dc66 100644
--- a/target/linux/lantiq/dts/ARV752DPW22.dts
+++ b/target/linux/lantiq/dts/ARV752DPW22.dts
@@ -174,80 +174,70 @@
 
 	gpio-leds {
 		compatible = "gpio-leds";
-		power {
-			label = "power";
+		power1 {
+			label = "power1";
 			gpios = <&gpio 3 1>;
-			default-state = "on";
+		};
+		internet {
+			label = "internet";
+			gpios = <&gpio 4 1>;
 		};
 		message {
 			label = "message";
 			gpios = <&gpio 5 1>;
-			default-state = "on";
 		};
-		power1 {
-			label = "power1";
+		power {
+			label = "power";
 			gpios = <&gpio 6 1>;
-			default-state = "on";
+			default-state = "keep";
 		};
 		voice1 {
 			label = "voice1";
 			gpios = <&gpio 8 1>;
-			default-state = "on";
 		};
 		microphone {
-			label = "microphone";
+			label = "umts";
 			gpios = <&gpiomm 3 1>;
-			default-state = "on";
 		};
 		wifi {
 			label = "wifi_rt";
 			gpios = <&gpiomm 4 1>;
-			default-state = "on";
 		};
 		fxs1 {
 			label = "fxs1";
 			gpios = <&gpiomm 5 1>;
-			default-state = "on";
 		};
 		fxs2 {
 			label = "fxs2";
 			gpios = <&gpiomm 6 1>;
-			default-state = "on";
 		};
 		fxo {
 			label = "fxo";
 			gpios = <&gpiomm 7 1>;
-			default-state = "on";
 		};
-		dsl {
-			label = "dsl";
+		internet2 {
+			label = "internet2";
 			gpios = <&gpiomm 8 1>;
-			default-state = "on";
 		};
 		voice2 {
 			label = "voice2";
 			gpios = <&gpiomm 9 1>;
-			default-state = "on";
 		};
 		eth1 {
 			 label = "eth1";
 			 gpios = <&gpiomm 11 1>;
-			 default-state = "on";
 		};
 		eth2 {
 			label = "eth2";
 			gpios = <&gpiomm 12 1>;
-			default-state = "on";
 		};
 		eth3 {
 			label = "eth3";
 			gpios = <&gpiomm 13 1>;
-			default-state = "on";
 		};
 		eth4 {
 			label = "eth4";
 			gpios = <&gpiomm 14 1>;
-			default-state = "on";
 		};
 	};
 };
-- 
1.9.1
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel



More information about the openwrt-devel mailing list