[OpenWrt-Devel] [PATCH] add support for WRTnode2P and WRTnode2R add led support for wrtnode platform

xzmu xzmu at wrtnode.com
Thu Dec 24 03:56:03 EST 2015


Signed-off-by: xzmu <xzmu at wrtnode.com>
---
 .../linux/ramips/base-files/etc/board.d/02_network |   2 +
 target/linux/ramips/base-files/etc/diag.sh         |   5 +
 target/linux/ramips/base-files/lib/ramips.sh       |   6 ++
 .../ramips/base-files/lib/upgrade/platform.sh      |   2 +
 target/linux/ramips/dts/WRTNODE2P.dts              |  99 ++++++++++++++++++
 target/linux/ramips/dts/WRTNODE2R.dts              | 114 +++++++++++++++++++++
 6 files changed, 228 insertions(+)
 create mode 100644 target/linux/ramips/dts/WRTNODE2P.dts
 create mode 100644 target/linux/ramips/dts/WRTNODE2R.dts

diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index d7d016b..816a1a7 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -175,6 +175,8 @@ ramips_setup_interfaces()
 	hg255d | \
 	rt-n14u | \
 	wrtnode | \
+	wrtnode2p | \
+	wrtnode2r | \
 	wt3020 | \
 	ur-326n4g | \
 	zbt-wa05)
diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index a7e2501..d596b8a 100644
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -253,6 +253,11 @@ get_status_led() {
 	zte-q7)
 		status_led="zte:red:status"
 		;;
+	wrtnode2r | \
+	wrtnode2p | \
+	wrtnode)
+		status_led="wrtnode:blue:indicator"
+		;;
 	esac
 }
 
diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index 4141ddd..6c74412 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -391,6 +391,12 @@ ramips_board_detect() {
 	*"WRTNODE")
 		name="wrtnode"
 		;;
+	*"WRTnode2R")
+		name="wrtnode2r"
+		;;
+	*"WRTnode2P")
+		name="wrtnode2p"
+		;;
 	*"Wansview NCS601W")
 		name="ncs601w"
 		;;
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index 2f64d8c..0fc5c26 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -119,6 +119,8 @@ platform_check_image() {
 	wr6202 |\
 	wr8305rt |\
 	wrtnode |\
+	wrtnode2r |\
+	wrtnode2p |\
 	wt1520 |\
 	wt3020 |\
 	x5 |\
diff --git a/target/linux/ramips/dts/WRTNODE2P.dts b/target/linux/ramips/dts/WRTNODE2P.dts
new file mode 100644
index 0000000..59866dd
--- /dev/null
+++ b/target/linux/ramips/dts/WRTNODE2P.dts
@@ -0,0 +1,99 @@
+/dts-v1/;
+
+/include/ "mt7628an.dtsi"
+
+/ {
+	compatible = "mediatek,wrtnode2p", "mediatek,mt7628an-soc";
+	model = "WRTnode2P";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	pinctrl {
+		state_default: pinctrl0 {
+			gpio {
+				ralink,group = "i2c", "gpio", "jtag";
+				ralink,function = "gpio";
+			};
+		};
+	};
+
+	palmbus at 10000000 {
+		spi at b00 {
+			status = "okay";
+
+			m25p80 at 0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "w25q256";
+				reg = <0 0>;
+				linux,modalias = "m25p80", "w25q256";
+				spi-max-frequency = <10000000>;
+				m25p,chunked-io = <32>;
+
+				partition at 0 {
+					label = "u-boot";
+					reg = <0x0 0x30000>;
+					read-only;
+				};
+
+				partition at 30000 {
+					label = "u-boot-env";
+					reg = <0x30000 0x10000>;
+					read-only;
+				};
+
+				factory: partition at 40000 {
+					label = "factory";
+					reg = <0x40000 0x10000>;
+					read-only;
+				};
+
+				partition at 50000 {
+					label = "firmware";
+					reg = <0x50000 0x1fb0000>;
+				};
+			};
+		};
+
+		uart1 at d00 {
+			status = "okay";
+		};
+
+	};
+
+	ethernet at 10100000 {
+		mtd-mac-address = <&factory 0x4>;
+		ralink,port-map = "llllw";
+	};
+
+	sdhci at 10130000 {
+		status = "okay";
+	};
+
+	pcie at 10140000 {
+		status = "okay";
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		indicator {
+			label = "wrtnode:blue:indicator";
+			gpios = <&gpio1 9 1>;
+		};
+	}; 
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <20>;
+		reset {
+			label = "reset";
+			gpios = <&gpio0 5 1>;
+			linux,code = <0x198>;
+		};
+	};
+};
+
diff --git a/target/linux/ramips/dts/WRTNODE2R.dts b/target/linux/ramips/dts/WRTNODE2R.dts
new file mode 100644
index 0000000..7f383ad
--- /dev/null
+++ b/target/linux/ramips/dts/WRTNODE2R.dts
@@ -0,0 +1,114 @@
+/dts-v1/;
+
+/include/ "mt7628an.dtsi"
+
+/ {
+	compatible = "mediatek,wrtnode2r", "mediatek,mt7628an-soc";
+	model = "WRTnode2R";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	pinctrl {
+		state_default: pinctrl0 {
+			gpio {
+				ralink,group = "i2c", "gpio", "wled_an";
+				ralink,function = "gpio";
+			};
+		};
+	};
+
+	palmbus at 10000000 {
+		spi at b00 {
+			status = "okay";
+
+			m25p80 at 0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "w25q256";
+				reg = <0 0>;
+				linux,modalias = "m25p80", "w25q256";
+				spi-max-frequency = <10000000>;
+				m25p,chunked-io = <32>;
+
+				partition at 0 {
+					label = "u-boot";
+					reg = <0x0 0x30000>;
+					read-only;
+				};
+
+				partition at 30000 {
+					label = "u-boot-env";
+					reg = <0x30000 0x10000>;
+					read-only;
+				};
+
+				factory: partition at 40000 {
+					label = "factory";
+					reg = <0x40000 0x10000>;
+					read-only;
+				};
+
+				partition at 50000 {
+					label = "firmware";
+					reg = <0x50000 0x1fb0000>;
+				};
+			};
+
+
+			spidev at 1 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "spidev";
+				reg = <1 0>;
+				linux,modalias = "spidev", "spidev";
+				spi-max-frequency = <10000000>;
+			};
+		};
+
+		uart1 at d00 {
+			status = "okay";
+		};
+
+		i2c at 900 {
+			status = "okay";
+		};
+
+	};
+
+	ethernet at 10100000 {
+		mtd-mac-address = <&factory 0x4>;
+		ralink,port-map = "llllw";
+	};
+
+	sdhci at 10130000 {
+		status = "okay";
+	};
+
+	pcie at 10140000 {
+		status = "okay";
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		indicator {
+			label = "wrtnode:blue:indicator";
+			gpios = <&gpio1 12 1>;
+		};
+	}; 
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <20>;
+		reset {
+			label = "reset";
+			gpios = <&gpio0 5 1>;
+			linux,code = <0x198>;
+		};
+	};
+
+};
+
-- 
2.1.4
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel



More information about the openwrt-devel mailing list