[OpenWrt-Devel] OpenWrt-Devel] sunxi: BananaPi reboot problem

[Zoltan HERPAI]

Hi Gerhard,

On Sat, 19 Dec 2015, Gerhard Bertelsmann wrote:

> Hi,
>
> I have a problem with my BananaPi rebooting with actual trunk (r47935):
>
[...]
> scanning bus 0 for devices... 1 USB Device(s) found
> scanning bus 2 for devices... 1 USB Device(s) found
> Hit any key to stop autoboot:  0
> switch to partitions #0, OK
> mmc0 is current device
> data abort
> pc : [<7f67945c>]          lr : [<7f6b1040>]
> reloc pc : [<4a01845c>]    lr : [<4a050040>]
> sp : 7f238cd8  ip : 00000001     fp : 00000018
> r10: 7f26f480  r9 : 7f240ee0     r8 : 00000000
> r7 : 00000000  r6 : 7f26f538     r5 : 7f26f4d0  r4 : 00000018
> r3 : 7f26f3d0  r2 : 7f6b1140     r1 : 00000021  r0 : 7f6b1143
> Flags: Nzcv  IRQs off  FIQs off  Mode SVC_32
> Resetting CPU ...
>
> resetting ...
>
> U-Boot SPL 2015.07 (Dec 19 2015 - 13:25:28)
>
> ###################################################################
>
> The BananaPi loops, throw the exception and can't boot the image -> boots 
> again.
> If I power cycle the BPi everything is fine and the BPi boots.
> Until I reboot -> it loops again.
>
> If I switch to GCC 4_8_LINARO everything is fine - strange.
>
> Does anybody know why the BPi behaves so strange ?

Which BPi model is this, standard BananaPi or BananaPro?

Thanks,
Zoltan H
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel