[OpenWrt-Devel] [PATCH] ar8216: Fix problem with AR8337 MAC swap handling

Heiner Kallweit hkallweit1 at gmail.com
Wed Apr 29 13:41:59 EDT 2015


AR8337 supports a configuration bit to swap MAC0 and MAC6.
Currently this is set in general if an AR8337 is detected and causes
issues with devices using an AR8334 (internally an AR8337, just
less chip pins).
And it might even cause issues with AR8337-based devices with
different board designs.

Swapping the MAC's however isn't needed for AR8337 in general.
It's just needed in case of certain board designs (affected devices
seem to be based on Atheros reference board AP135/136-010).
Therefore this configuration bit should be moved to platform data.

The patch includes the needed changes to the device initialization
code of affected devices. Hopefully I didn't miss any ..

Signed-off-by: Heiner Kallweit <hkallweit1 at gmail.com>
---
 target/linux/ar71xx/files/arch/mips/ath79/mach-esr1750.c   | 1 +
 target/linux/ar71xx/files/arch/mips/ath79/mach-f9k1115v2.c | 1 +
 target/linux/ar71xx/files/arch/mips/ath79/mach-nbg6716.c   | 1 +
 target/linux/ar71xx/files/arch/mips/ath79/mach-wlr8100.c   | 1 +
 target/linux/generic/files/drivers/net/phy/ar8327.c        | 6 +++---
 target/linux/generic/files/include/linux/ar8216_platform.h | 4 +++-
 6 files changed, 10 insertions(+), 4 deletions(-)

diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-esr1750.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-esr1750.c
index 2a34b3a..d2bc177 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-esr1750.c
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-esr1750.c
@@ -97,6 +97,7 @@ static struct ar8327_pad_cfg esr1750_ar8327_pad0_cfg = {
 	.rxclk_delay_en = true,
 	.txclk_delay_sel = AR8327_CLK_DELAY_SEL2,
 	.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
+	.mac06_exchange_en = true,
 };
 
 static struct ar8327_platform_data esr1750_ar8327_data = {
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-f9k1115v2.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-f9k1115v2.c
index 69d005d..9e86e9a 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-f9k1115v2.c
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-f9k1115v2.c
@@ -98,6 +98,7 @@ static struct ar8327_pad_cfg f9k1115v2_ar8327_pad0_cfg = {
 	.rxclk_delay_en = true,
 	.txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
 	.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
+	.mac06_exchange_en = true,
 };
 
 static struct ar8327_pad_cfg f9k1115v2_ar8327_pad6_cfg = {
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-nbg6716.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-nbg6716.c
index 0ca2e56..69a73cc 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-nbg6716.c
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-nbg6716.c
@@ -251,6 +251,7 @@ static void __init nbg6716_010_setup(void)
 	nbg6716_ar8327_pad0_cfg.rxclk_delay_en = true;
 	nbg6716_ar8327_pad0_cfg.txclk_delay_sel = AR8327_CLK_DELAY_SEL1;
 	nbg6716_ar8327_pad0_cfg.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2;
+	nbg6716_ar8327_pad0_cfg.mac06_exchange_en = true;
 
 	/* GMAC6 of the AR8337 switch is connected to GMAC1 via SGMII */
 	nbg6716_ar8327_pad6_cfg.mode = AR8327_PAD_MAC_SGMII;
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wlr8100.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wlr8100.c
index 88022e7..6a90c6e 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-wlr8100.c
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-wlr8100.c
@@ -186,6 +186,7 @@ static void __init wlr8100_010_setup(void)
 	wlr8100_ar8327_pad0_cfg.rxclk_delay_en = true;
 	wlr8100_ar8327_pad0_cfg.txclk_delay_sel = AR8327_CLK_DELAY_SEL1;
 	wlr8100_ar8327_pad0_cfg.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2;
+	wlr8100_ar8327_pad0_cfg.mac06_exchange_en = true;
 
 	/* GMAC6 of the AR8337 switch is connected to GMAC1 via SGMII */
 	wlr8100_ar8327_pad6_cfg.mode = AR8327_PAD_MAC_SGMII;
diff --git a/target/linux/generic/files/drivers/net/phy/ar8327.c b/target/linux/generic/files/drivers/net/phy/ar8327.c
index 07e837e..a6dd7d8 100644
--- a/target/linux/generic/files/drivers/net/phy/ar8327.c
+++ b/target/linux/generic/files/drivers/net/phy/ar8327.c
@@ -124,6 +124,9 @@ ar8327_get_pad_cfg(struct ar8327_pad_cfg *cfg)
 		break;
 	}
 
+	if (cfg->mac06_exchange_en)
+		t |= AR8337_PAD_MAC06_EXCHANGE_EN;
+
 	return t;
 }
 
@@ -508,9 +511,6 @@ ar8327_hw_config_pdata(struct ar8xxx_priv *priv,
 	data->port6_status = ar8327_get_port_init_status(&pdata->port6_cfg);
 
 	t = ar8327_get_pad_cfg(pdata->pad0_cfg);
-	if (chip_is_ar8337(priv))
-		t |= AR8337_PAD_MAC06_EXCHANGE_EN;
-
 	ar8xxx_write(priv, AR8327_REG_PAD0_MODE, t);
 	t = ar8327_get_pad_cfg(pdata->pad5_cfg);
 	ar8xxx_write(priv, AR8327_REG_PAD5_MODE, t);
diff --git a/target/linux/generic/files/include/linux/ar8216_platform.h b/target/linux/generic/files/include/linux/ar8216_platform.h
index 4935ad3..d70f11a 100644
--- a/target/linux/generic/files/include/linux/ar8216_platform.h
+++ b/target/linux/generic/files/include/linux/ar8216_platform.h
@@ -47,6 +47,7 @@ struct ar8327_pad_cfg {
 	bool sgmii_delay_en;
 	enum ar8327_clk_delay_sel txclk_delay_sel;
 	enum ar8327_clk_delay_sel rxclk_delay_sel;
+	bool mac06_exchange_en;
 };
 
 enum ar8327_port_speed {
@@ -128,4 +129,5 @@ struct ar8327_platform_data {
 	const struct ar8327_led_info *leds;
 };
 
-#endif /* AR8216_PLATFORM_H */
\ No newline at end of file
+#endif /* AR8216_PLATFORM_H */
+
-- 
2.3.5
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel



More information about the openwrt-devel mailing list