[OpenWrt-Devel] [PATCH][V3] ramips:Add support for Microduino MicroWRT

郭传鈜 gch981213 at gmail.com
Wed Apr 8 08:41:14 EDT 2015


Hi!

    I'm sorry for the crazy mistake in the previous patch.This time I've
asked Jason to test the firmware before giving me the patch.Everything
works fine now :-)
I wonder if this patch could be accepted because I'm planning to send
another patch for a new device and I don't know if the new patch should be
based on the source with this patch applied or not.
    Best regards.
    Guo Chuanhong


2015-04-06 17:13 GMT+08:00 郭传鈜 <gch981213 at gmail.com>:

> From: 盛凯 <shengkai81 at gmail.com>
>
> Sorry,Sheng Kai told me that the flash layout is wrong in his previous
> patch-_-!!
>
> From: 盛凯 <shengkai81 at gmail.com>
>
> v3:fix flash layout and change model name
> v2:fix space issues
>
> MicroWRT is an wireless router with 2 USB,1 ethernet port. It
> has a 16M flash and 64M DDR2 RAM. You can use most interface, such as
> i2c, SPI, i2s and PCIe. Besides that there are three expansion borad to
> combine with the core board. The detailed information, please refer to
> https://www.microduino.cc/wiki/index.php?title=Main_Page
>
> This patch adds support for it.
> Because there is only one port,so disabled VLAN and use eth0 as lan
> port. and only a power LED control by power pin.
> Signed-off-by: 盛凯 <shengkai81 at gmail.com>
> ---
>  .../linux/ramips/base-files/etc/board.d/02_network |   1 +
>  target/linux/ramips/base-files/lib/ramips.sh       |   3 +
>  .../ramips/base-files/lib/upgrade/platform.sh      |   1 +
>  target/linux/ramips/dts/MicroWRT.dts               | 107
> +++++++++++++++++++++
>  target/linux/ramips/image/Makefile                 |   3 +
>  target/linux/ramips/mt7620/profiles/microwrt.mk    |   9 ++
>  6 files changed, 124 insertions(+)
>  create mode 100644 target/linux/ramips/dts/MicroWRT.dts
>  create mode 100644 target/linux/ramips/mt7620/profiles/microwrt.mk
>
> diff --git a/target/linux/ramips/base-files/etc/board.d/02_network
> b/target/linux/ramips/base-files/etc/board.d/02_network
> index d4ec19d..24e1ba8 100755
> --- a/target/linux/ramips/base-files/etc/board.d/02_network
> +++ b/target/linux/ramips/base-files/etc/board.d/02_network
> @@ -45,6 +45,7 @@ ramips_setup_interfaces()
>
>         3g150b | \
>         3g300m | \
> +       microwrt | \
>         w150m | \
>         zte-q7 | \
>         all0256n | \
> diff --git a/target/linux/ramips/base-files/lib/ramips.sh
> b/target/linux/ramips/base-files/lib/ramips.sh
> index fc6eb37..dffa832 100755
> --- a/target/linux/ramips/base-files/lib/ramips.sh
> +++ b/target/linux/ramips/base-files/lib/ramips.sh
> @@ -202,6 +202,9 @@ ramips_board_detect() {
>         *"Planex MZK-750DHP")
>                 name="mzk-750dhp"
>                 ;;
> +       *"Microduino MicroWRT")
> +               name="microwrt"
> +               ;;
>         *"NBG-419N")
>                 name="nbg-419n"
>                 ;;
> diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh
> b/target/linux/ramips/base-files/lib/upgrade/platform.sh
> index a5773b5..17b456b 100755
> --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
> +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
> @@ -60,6 +60,7 @@ platform_check_image() {
>         m2m | \
>         m3 | \
>         m4 | \
> +       microwrt | \
>         mlw221 | \
>         mlwg2 | \
>         mofi3500-3gn | \
> diff --git a/target/linux/ramips/dts/MicroWRT.dts
> b/target/linux/ramips/dts/MicroWRT.dts
> new file mode 100644
> index 0000000..9500b14
> --- /dev/null
> +++ b/target/linux/ramips/dts/MicroWRT.dts
> @@ -0,0 +1,107 @@
> +/dts-v1/;
> +
> +/include/ "mt7620a.dtsi"
> +
> +/ {
> +       compatible = "microwrt", "ralink,mt7620a-soc";
> +       model = "Microduino MicroWRT";
> +
> +       chosen {
> +               bootargs = "console=ttyS0,115200";
> +       };
> +
> +       palmbus at 10000000 {
> +               gpio2: gpio at 660 {
> +                       status = "okay";
> +               };
> +
> +               gpio3: gpio at 688 {
> +                       status = "okay";
> +               };
> +
> +               spi at b00 {
> +                       status = "okay";
> +
> +                       m25p80 at 0 {
> +                               #address-cells = <1>;
> +                               #size-cells = <1>;
> +                               compatible = "w25q128";
> +                               reg = <0 0>;
> +                               linux,modalias = "m25p80", "w25q128";
> +                               spi-max-frequency = <10000000>;
> +
> +                               partition at 0 {
> +                                       label = "u-boot";
> +                                       reg = <0x0 0x20000>;
> +                                       read-only;
> +                               };
> +
> +                               partition at 20000 {
> +                                       label = "u-boot-env";
> +                                       reg = <0x20000 0x10000>;
> +                                       read-only;
> +                               };
> +
> +                               factory: partition at 30000 {
> +                                       label = "factory";
> +                                       reg = <0x30000 0x10000>;
> +                                       read-only;
> +                               };
> +
> +                               partition at 40000 {
> +                                       label = "firmware";
> +                                       reg = <0x40000 0xfc0000>;
> +                               };
> +                       };
> +               };
> +       };
> +
> +       ehci at 101c0000 {
> +               status = "okay";
> +       };
> +
> +       ohci at 101c1000 {
> +               status = "okay";
> +       };
> +
> +       pcie at 10140000 {
> +               status = "okay";
> +       };
> +
> +       ethernet at 10100000 {
> +               pinctrl-names = "default";
> +               pinctrl-0 = <&ephy_pins>;
> +               mtd-mac-address = <&factory 0x4>;
> +               ralink,port-map = "llllw";
> +       };
> +
> +       wmac at 10180000 {
> +               ralink,mtd-eeprom = <&factory 0>;
> +       };
> +
> +       pinctrl {
> +               state_default: pinctrl0 {
> +                       default {
> +                               ralink,group = "wled", "i2c", "wdt",
> "uartf";
> +                               ralink,function = "gpio";
> +                       };
> +               };
> +       };
> +
> +       gpio-keys-polled {
> +               compatible = "gpio-keys-polled";
> +               #address-cells = <1>;
> +               #size-cells = <0>;
> +               poll-interval = <20>;
> +               reset {
> +                       label = "reset";
> +                       gpios = <&gpio0 1 1>;
> +                       linux,code = <0x198>;
> +               };
> +               wps {
> +                       label = "wps";
> +                       gpios = <&gpio0 2 1>;
> +                       linux,code = <0x211>;
> +               };
> +       };
> +   };
> diff --git a/target/linux/ramips/image/Makefile
> b/target/linux/ramips/image/Makefile
> index 743f7b4..e6b5112 100644
> --- a/target/linux/ramips/image/Makefile
> +++ b/target/linux/ramips/image/Makefile
> @@ -865,6 +865,8 @@ Image/Build/Profile/XIAOMI-MIWIFI-MINI=$(call
> BuildFirmware/Default16M/$(1),$(1)
>  Image/Build/Profile/ZTE-Q7=$(call
> BuildFirmware/Default8M/$(1),$(1),zte-q7,ZTE-Q7)
>  Image/Build/Profile/ZBT-WA05=$(call
> BuildFirmware/Default8M/$(1),$(1),zbt-wa05,ZBT-WA05)
>  Image/Build/Profile/ArcherC20i=$(call
> BuildFirmware/Tplink/$(1),$(1),ArcherC20i,ArcherC20i)
> +microwrt_mtd_size=16515072
> +Image/Build/Profile/MicroWRT=$(call
> BuildFirmware/CustomFlash/$(1),$(1),microwrt,MicroWRT,$(microwrt_mtd_size))
>
>
>  ifeq ($(SUBTARGET),mt7620)
> @@ -895,6 +897,7 @@ define Image/Build/Profile/Default
>         $(call Image/Build/Profile/ZTE-Q7,$(1))
>         $(call Image/Build/Profile/ZBT-WA05,$(1))
>         $(call Image/Build/Profile/ArcherC20i,$(1))
> +       $(call Image/Build/Profile/MicroWRT,$(1))
>  endef
>  endif
>
> diff --git a/target/linux/ramips/mt7620/profiles/microwrt.mk
> b/target/linux/ramips/mt7620/profiles/microwrt.mk
> new file mode 100644
> index 0000000..38213ac
> --- /dev/null
> +++ b/target/linux/ramips/mt7620/profiles/microwrt.mk
> @@ -0,0 +1,9 @@
> +define Profile/MicroWRT
> +       NAME:=Microduino MicroWRT
> +       PACKAGES:= kmod-usb-core kmod-usb2 kmod-usb-ohci
> +endef
> +
> +define Profile/MicroWRT/Description
> +               Package set compatible with MicroWRT
> +endef
> +$(eval $(call Profile,MicroWRT))
> --
> 2.1.0
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.infradead.org/pipermail/openwrt-devel/attachments/20150408/d32da5c4/attachment.htm>
-------------- next part --------------
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel


More information about the openwrt-devel mailing list