[OpenWrt-Devel] I'd like to donate a Linksys WRT300N V1
alexhenrie24 at gmail.com
Fri Apr 3 18:42:03 EDT 2015
2015-03-30 15:43 GMT-06:00 Rafał Miłecki <zajec5 at gmail.com>:
> On 17 March 2015 at 22:05, Alex Henrie <alexhenrie24 at gmail.com> wrote:
>> I just mailed the router. When it arrives, please send confirmation to
>> me and to treasurer at spi-inc.org.
> I just got it today, thanks!
> I disassembled it, it's really a PCMCIA wireless card, nice :) Quite
> an unique device!
> I had some problems installing OpenWrt, not sure what they were caused
> by. Ppl trying to install original firmware seemed to had these issues
> too, so they may be not related to OpenWrt firmware only. I got it as
> well for the original firmware, however after a reboot is suddenly
> So I decided to install some older OpenWrt as I suspected it may be
> related to flash size. 12.09 was rejected, so I tried 10.03.1. It got
> accepted but I think it doesn't boot and I've soft bricked this
> I'll have to install serial console (requires soldering a header) and
> doing more tests, so it may take me a bit more of time.
> Anyway, I'm happy to have this device for experiments, thanks!
You're welcome! Let me know if you need a serial header, they only
cost about $1 and I should have mailed one to you with the router but
I wasn't thinking.
Anyway, keep trying, I'm sure you will get it working.
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
More information about the openwrt-devel