[OpenWrt-Devel] Ubiquiti Nanostation LOCO M5
bmoffitt at ayrstone.com
Wed Sep 24 19:31:39 EDT 2014
You are completely correct - thank you!
I booted one up in AirOS and it says the firmware version is XW5.5.9.
OK, at least I know what I need to do... does anyone know if all the
Ubiquiti "M" devices are going to become "XW" models?
On 9/24/2014 9:54 AM, cholin wrote:
> Maybe you have one of these new Loco M5 XW? Support for that device has
> been added with r42549 (9 days ago)  and is only available in current
> trunk (unfortunately not in barrier breaker rc3).
> Am 24.09.2014 um 18:21 schrieb Bill:
>> I just got 5 LOCO M5 units that won't run OpenWRT. They are datestamped
>> 1422K; when I try to flash them, they give me:
>> received ERROR <code=2, msg=Firmware check failed>
>> I am using the Bullet M image
>> (openwrt-ar71xx-generic-ubnt-bullet-m-squashfs-factory.bin), flashing
>> with tftp in binary mode.
>> I have one other LOCO M5 with datestamp 1340K that works fine - flashes
>> fine every time. But the new units won't take the firmware at all.
>> I assume UBNT did something in the bootloader that is disabling OpenWRT.
>> Any help will be welcome. I can open one up and attach a serial cable,
>> but I'm not sure what I'd look for or what I'd do about it...
>> openwrt-devel mailing list
>> openwrt-devel at lists.openwrt.org
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
More information about the openwrt-devel