[OpenWrt-Devel] [PATCH] ramips: add support for Nexx WT1520

John Crispin blogic at openwrt.org
Mon Sep 15 11:56:56 EDT 2014


Hi,

patch looks whitespace broken. please fix and resend

	John

On 15/09/2014 17:40, Roger Pueyo Centelles wrote:
> This patch adds support for Nexx WT1520 devices.
> 
> Signed-off-by: Roger Pueyo Centelles <openwrt at rogerpueyo.com> --- 
> diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds 
> b/target/linux/ramips/base-files/etc/board.d/01_leds index
> 01e2363..1806ff2 100755 ---
> a/target/linux/ramips/base-files/etc/board.d/01_leds +++
> b/target/linux/ramips/base-files/etc/board.d/01_leds @@ -112,6
> +112,9 @@ case $board in hlk-rm04) set_wifi_led
> "rt2800pci-phy0::radio" ;; +    nexx-wt1520) +        set_wifi_led
> "rt2800pci-phy0::radio" +        ;; all0239-3g|\ hw550-3g) 
> set_usb_led "hw550-3g:green:usb" diff --git
> a/target/linux/ramips/base-files/etc/board.d/02_network 
> b/target/linux/ramips/base-files/etc/board.d/02_network index
> e027b3b..765d398 100755 ---
> a/target/linux/ramips/base-files/etc/board.d/02_network +++
> b/target/linux/ramips/base-files/etc/board.d/02_network @@ -103,6
> +103,7 @@ ramips_setup_interfaces() dir-320-b1 | \ dir-615-h1 | \ 
> hlk-rm04 | \ +    nexx-wt1520 | \ mzk-w300nh2 | \ mzk-750dhp) 
> ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" diff --git
> a/target/linux/ramips/base-files/etc/diag.sh 
> b/target/linux/ramips/base-files/etc/diag.sh index 9ad7ccb..472da4b
> 100755 --- a/target/linux/ramips/base-files/etc/diag.sh +++
> b/target/linux/ramips/base-files/etc/diag.sh @@ -63,6 +63,9 @@
> get_status_led() { hlk-rm04) status_led="hlk-rm04:red:power" ;; +
> nexx-wt1520) +        status_led="nexx-wt1520:white:power" +
> ;; all0239-3g|\ hw550-3g) status_led="hw550-3g:green:status" diff
> --git a/target/linux/ramips/base-files/lib/ramips.sh 
> b/target/linux/ramips/base-files/lib/ramips.sh index
> bb42ace..0a09225 100755 ---
> a/target/linux/ramips/base-files/lib/ramips.sh +++
> b/target/linux/ramips/base-files/lib/ramips.sh @@ -157,6 +157,9 @@
> ramips_board_detect() { *"HILINK HLK-RM04") name="hlk-rm04" ;; +
> *"Nexx WT1520") +        name="nexx-wt1520" +        ;; *"HAME
> MPR-A1") name="mpr-a1" ;; diff --git
> a/target/linux/ramips/base-files/lib/upgrade/platform.sh 
> b/target/linux/ramips/base-files/lib/upgrade/platform.sh index
> 407c218..8ff2da6 100755 ---
> a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++
> b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -52,6
> +52,7 @@ platform_check_image() { hw550-3g | \ hg255d | \ hlk-rm04
> | \ +    nexx-wt1520 | \ ip2202 | \ m3 | \ m4 | \ diff --git
> a/target/linux/ramips/dts/NEXXWT1520.dts 
> b/target/linux/ramips/dts/NEXXWT1520.dts new file mode 100644 index
> 0000000..c89bea1 --- /dev/null +++
> b/target/linux/ramips/dts/NEXXWT1520.dts @@ -0,0 +1,108 @@ 
> +/dts-v1/; + +/include/ "rt5350.dtsi" + +/ { +    compatible =
> "NEXXWT1520", "ralink,rt5350-soc"; +    model = "Nexx WT1520"; + +
> memory at 0 { +        device_type = "memory"; +        reg = <0x0
> 0x2000000>; +    }; + +    chosen { +        bootargs =
> "console=ttyS1,57600"; +    }; + +    palmbus at 10000000 { +
> uart at 500 { +            status = "okay"; +        }; + +
> spi at b00 { +            status = "okay"; +            m25p80 at 0 { +
> #address-cells = <1>; +                #size-cells = <1>; +
> compatible = "w25q32"; +                reg = <0 0>; +
> linux,modalias = "m25p80", "s25fl064k"; +
> spi-max-frequency = <10000000>; + +                partition at 0 { +
> label = "u-boot"; +                    reg = <0x0 0x30000>; +
> read-only; +                }; + +                partition at 30000
> { +                    label = "u-boot-env"; +
> reg = <0x30000 0x10000>; +                    read-only; +
> }; + +                factory: partition at 40000 { +
> label = "factory"; +                    reg = <0x40000 0x10000>; +
> read-only; +                }; + +                partition at 50000
> { +                    label = "firmware"; +                    reg
> = <0x50000 0x3b0000>; +                }; +            }; +
> }; +    }; + +    pinctrl { +        state_default: pinctrl0 { +
> gpio { +                ralink,group = "jtag"; +
> ralink,function = "gpio"; +            }; +        }; +    }; + +
> ethernet at 10100000 { +        mtd-mac-address = <&factory 0x4>; +
> }; + +    wmac at 10180000 { +        ralink,mtd-eeprom = <&factory
> 0>; +    }; + +    ehci at 101c0000 { +        status = "okay"; +
> }; + +    ohci at 101c1000 { +        status = "okay"; +    }; + +
> gpio-keys-polled { +        compatible = "gpio-keys-polled"; +
> #address-cells = <1>; +        #size-cells = <0>; +
> poll-interval = <20>; +    }; + +    gpio-leds { +
> compatible = "gpio-leds"; +        power { +            label =
> "nexx-wt1520:white:power"; +            gpios = <&gpio0 0 1>; +
> }; +    }; + +        gpio_export { +                compatible =
> "gpio-export"; +                #size-cells = <0>; +
> usb-mode { +                        gpio-export,name = "usb-mode"; 
> +                        gpio-export,output = <0>; +
> gpios = <&gpio0 18 0>; +                }; +        }; +}; diff
> --git a/target/linux/ramips/image/Makefile 
> b/target/linux/ramips/image/Makefile index 35057e4..6f7c51c 100644 
> --- a/target/linux/ramips/image/Makefile +++
> b/target/linux/ramips/image/Makefile @@ -434,6 +434,14 @@ define
> BuildFirmware/HLKRM04/initramfs endef 
> Image/Build/Profile/HLKRM04=$(call 
> BuildFirmware/HLKRM04/$(1),$(1),hlk-rm04,HLKRM04,HLK-RM02)
> 
> +BuildFirmware/NEXXWT1520/squashfs=$(call 
> BuildFirmware/Default4M/squashfs,$(1),$(2),$(3),$(4)) +define
> BuildFirmware/NEXXWT1520/initramfs +    $(call
> BuildFirmware/OF/initramfs,$(1),$(2),$(3),$(4)) +    #mkhilinkfw -e
> -i$(call imgname,$(1),$(2))-uImage.bin -o $(call 
> imgname,$(1),$(2))-factory.bin; +endef + 
> +Image/Build/Profile/NEXXWT1520=$(call 
> BuildFirmware/NEXXWT1520/$(1),$(1),nexx-wt1520,NEXXWT1520,NEXXWT1520)
>
> 
+
> Image/Build/Profile/M3=$(call
> BuildFirmware/Poray4M/$(1),$(1),m3,M3)
> 
> Image/Build/Profile/M4=$(call
> BuildFirmware/PorayDualSize/$(1),$(1),m4,M4) @@ -598,6 +606,7 @@
> define Image/Build/Profile/Default $(call
> Image/Build/Profile/FREESTATION5,$(1)) #    $(call
> Image/Build/Profile/HG255D,$(1)) $(call
> Image/Build/Profile/HLKRM04,$(1)) +    $(call
> Image/Build/Profile/NEXXWT1520,$(1)) $(call
> Image/Build/Profile/HW550-3G,$(1)) $(call
> Image/Build/Profile/IP2202,$(1)) $(call
> Image/Build/Profile/M3,$(1)) diff --git
> a/target/linux/ramips/rt305x/profiles/nexx.mk 
> b/target/linux/ramips/rt305x/profiles/nexx.mk new file mode 100644 
> index 0000000..45d81ec --- /dev/null +++
> b/target/linux/ramips/rt305x/profiles/nexx.mk @@ -0,0 +1,17 @@ +# 
> +# Copyright (C) 2013 OpenWrt.org +# +# This is free software,
> licensed under the GNU General Public License v2. +# See /LICENSE
> for more information. +# + +define Profile/NEXXWT1520 +
> NAME:=Nexx WT1520 +    PACKAGES:=kmod-usb2 +endef + +define
> Profile/NEXXWT1520/Description +    Package set for NEXXWT1520 
> +endef + +$(eval $(call Profile,NEXXWT1520)) 
> _______________________________________________ openwrt-devel
> mailing list openwrt-devel at lists.openwrt.org 
> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
> 
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel



More information about the openwrt-devel mailing list