[OpenWrt-Devel] omap4 / Pandaboard / Pandaboard-ES / Kernel 3.14.22
Bastian Bittorf
bittorf at bluebottle.com
Tue Oct 21 09:12:26 EDT 2014
* Weimarnetz e.V., Vorstand/Vereinsvorsitzender: Bastian Bittorf <bittorf at bluebottle.com> [27.03.2014 15:53]:
> http://www.intercity-vpn.de/files/openwrt/pandaboard_dmesg_booterror-kernel_3.14-rc8-new_uboot.txt
today i tried kernel 3.14.22 without luck, this is the bootlog which just hangs.
Has somebody OpenWrt running on an older Pandaboard?
bye, bastian
dmesg:
OMAP4460 ES1.1
SPL: Please implement spl_start_uboot() for your board
SPL: Direct Linux boot not active!
reading u-boot.img
reading u-boot.img
U-Boot SPL 2014.10 (Oct 21 2014 - 05:19:28)
OMAP4460 ES1.1
SPL: Please implement spl_start_uboot() for your board
SPL: Direct Linux boot not active!
reading u-boot.img
reading u-boot.img
U-Boot 2014.10 (Oct 21 2014 - 05:19:28)
CPU : OMAP4460 ES1.1
Board: OMAP4 Panda
I2C: ready
DRAM: 1 GiB
MMC: OMAP SD/MMC: 0
Using default environment
Net: No ethernet found.
Hit any key to stop autoboot: 0
switch to partitions #0, OK
mmc0 is current device
SD/MMC found on device 0
reading boot.scr
** Unable to read file boot.scr **
reading uEnv.txt
** Unable to read file uEnv.txt **
1885608 bytes read in 98 ms (18.3 MiB/s)
50533 bytes read in 19 ms (2.5 MiB/s)
Booting from mmc0 ...
Kernel image @ 0x82000000 [ 0x000000 - 0x1cc5a8 ]
## Flattened Device Tree blob at 88000000
Booting using the fdt blob at 0x88000000
Loading Device Tree to 8fff0000, end 8ffff564 ... OK
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.14.22 (automat at bittorf-wireless.de) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r43008) )#1 SMP Tue Oct 21 06:11:23 EDT 2014
[ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: TI OMAP4 PandaBoard
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] OMAP4460 ES1.1
[ 0.000000] PERCPU: Embedded 7 pages/cpu @eefcb000 s8064 r8192 d12416 u32768
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260368
[ 0.000000] Kernel command line: console=ttyO2,115200n8 vram=16M root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 1032560K/1047552K available (3799K kernel code, 309K rwdata, 1140K rodata, 267K init, 229K bss, 14992K reserved, 269312K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc04daf1c (4940 kB)
[ 0.000000] .init : 0xc04db000 - 0xc051df80 ( 268 kB)
[ 0.000000] .data : 0xc051e000 - 0xc056b528 ( 310 kB)
[ 0.000000] .bss : 0xc056b528 - 0xc05a4c78 ( 230 kB)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] ti_dt_clocks_register: failed to lookup clock node bandgap_fclk
[ 0.000000] OMAP clockevent source: timer1 at 32768 Hz
[ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65536000000000ns
[ 0.000030] OMAP clocksource: 32k_counter at 32768 Hz
[ 0.000122] smp_twd: clock not found -2
[ 0.000946] Console: colour dummy device 80x30
[ 0.000976] Calibrating local timer... 349.05MHz.
[ 0.059387] Calibrating delay loop... 1391.00 BogoMIPS (lpj=6955008)
[ 0.099304] pid_max: default: 32768 minimum: 301
[ 0.099487] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.099517] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.110748] CPU: Testing write buffer coherency: ok
[ 0.111053] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.111083] Setting up static identity map for 0x80013220 - 0x80013278
[ 0.111206] L310 cache controller enabled
[ 0.111206] l2x0: 16 ways, CACHE_ID 0x410000c7, AUX_CTRL 0x7e470000, Cache size: 1024 kB
[ 0.112426] CPU1: Booted secondary processor
[ 0.149139] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.149261] Brought up 2 CPUs
[ 0.149261] SMP: Total of 2 processors activated.
[ 0.149291] CPU: All CPU(s) started in SVC mode.
[ 0.152832] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.154083] omap_hwmod: l3_main_3 using broken dt data from ocp
[ 0.155181] omap_hwmod: l3_main_2 using broken dt data from ocp
[ 0.241180] pinctrl core: initialized pinctrl subsystem
[ 0.241760] regulator-dummy: no parameters
[ 0.242218] NET: Registered protocol family 16
[ 0.243377] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.244903] cpuidle: using governor ladder
[ 0.244903] cpuidle: using governor menu
[ 0.260894] OMAP GPIO hardware version 0.1
[ 0.265411] omap-gpmc 50000000.gpmc: GPMC revision 6.0
[ 0.276153] platform 4b501000.aes: Cannot lookup hwmod 'aes'
[ 0.276428] platform 480a5000.des: Cannot lookup hwmod 'des'
[ 0.281829] omap_init_mbox: hwmod doesn't have valid attrs
[ 0.282592] OMAP DMA hardware revision 0.0
[ 0.293304] bio: create slab <bio-0> at 0
[ 0.294830] edma-dma-engine edma-dma-engine.0: Can't allocate PaRAM dummy slot
[ 0.294830] edma-dma-engine: probe of edma-dma-engine.0 failed with error -5
[ 0.320220] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver
[ 0.398498] hsusb1_vbus: 3300 mV
[ 0.398590] reg-fixed-voltage wl12xx_vmmc.10: could not find pctldev for node /ocp/pinmux at 4a100040/pinmux_wl12xx_gpio, defer ring probe
[ 0.398620] platform wl12xx_vmmc.10: Driver reg-fixed-voltage requests probe deferral
[ 0.402587] omap_i2c 48070000.i2c: could not find pctldev for node /ocp/pinmux at 4a100040/pinmux_i2c1_pins, deferring probe
[ 0.402587] platform 48070000.i2c: Driver omap_i2c requests probe deferral
[ 0.402648] omap_i2c 48072000.i2c: could not find pctldev for node /ocp/pinmux at 4a100040/pinmux_i2c2_pins, deferring probe
[ 0.402648] platform 48072000.i2c: Driver omap_i2c requests probe deferral
[ 0.402679] omap_i2c 48060000.i2c: could not find pctldev for node /ocp/pinmux at 4a100040/pinmux_i2c3_pins, deferring probe
[ 0.402709] platform 48060000.i2c: Driver omap_i2c requests probe deferral
[ 0.402740] omap_i2c 48350000.i2c: could not find pctldev for node /ocp/pinmux at 4a100040/pinmux_i2c4_pins, deferring probe
[ 0.402740] platform 48350000.i2c: Driver omap_i2c requests probe deferral
[ 0.403106] pps_core: LinuxPPS API ver. 1 registered
[ 0.403137] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti at linux.it>
[ 0.403228] PTP clock support registered
[ 0.404174] Advanced Linux Sound Architecture Driver Initialized.
[ 0.405151] Switched to clocksource 32k_counter
[ 0.419769] NET: Registered protocol family 2
[ 0.420562] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.420654] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.420806] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.420867] TCP: reno registered
[ 0.420898] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.420928] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.421264] NET: Registered protocol family 1
[ 0.424285] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.424957] bounce pool size: 64 pages
[ 0.425445] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.425445] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.425659] msgmni has been set to 1490
[ 0.425903] io scheduler noop registered
[ 0.425903] io scheduler deadline registered (default)
[ 0.427459] pinctrl-single 4a100040.pinmux: 203 pins at pa fc100040 size 406
[ 0.427642] pinctrl-single 4a31e040.pinmux: 28 pins at pa fc31e040 size 56
[ 0.429748] OMAP DSS rev 4.0
[ 0.432434] omapfb omapfb: no displays
[ 0.432525] omapfb omapfb: failed to setup omapfb
[ 0.432556] platform omapfb: Driver omapfb requests probe deferral
[ 0.433502] Serial: 8250/16550 driver, 2 ports, IRQ sharing enabled
[ 0.435241] omap_uart 4806a000.serial: no wakeirq for uart0
[ 0.435455] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 104, base_baud = 3000000) is a OMAP UART0
[ 0.435852] omap_uart 4806c000.serial: no wakeirq for uart0
[ 0.436004] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 105, base_baud = 3000000) is a OMAP UART1
[ 0.436401] omap_uart 48020000.serial: no wakeirq for uart0
[ 0.436584] 48020000.serial: ttyO2 at MMIO 0x48020000 (irq = 106, base_baud = 3000000) is a OMAP UART2
[ 1.162536] console [ttyO2] enabled
[ 1.166625] omap_uart 4806e000.serial: no wakeirq for uart0
[ 1.172637] 4806e000.serial: ttyO3 at MMIO 0x4806e000 (irq = 102, base_baud = 3000000) is a OMAP UART3
[ 1.189331] i2c /dev entries driver
[ 1.194213] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
[ 1.202636] omap_hsmmc 4809c000.mmc: vmmc regulator missing
[ 1.208557] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral
[ 1.216278] omap_hsmmc 480d5000.mmc: vmmc regulator missing
[ 1.222167] platform 480d5000.mmc: Driver omap_hsmmc requests probe deferral
<hangs here>
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list