[OpenWrt-Devel] [PATCH] comgt: add ncm proto support
John Crispin
blogic at openwrt.org
Wed Oct 8 06:00:23 EDT 2014
the e3267 that sami sent me works with this proto, but i am failing to
get a DHCP addr. could someone with a ncm dongle please try this patch
on top of latest trunk please and tell me if they are getting a dhcp addr ?
On 08/10/2014 05:17, John Crispin wrote:
> From: Matti Laakso <malaakso at elisanet.fi>
>
> Signed-off-by: Matti Laakso <malaakso at elisanet.fi>
> ---
> package/network/utils/comgt/Makefile | 15 ++
> package/network/utils/comgt/files/3g.usb | 2 +-
> package/network/utils/comgt/files/ncm.json | 49 +++++++
> package/network/utils/comgt/files/ncm.sh | 156 +++++++++++++++++++++
> package/network/utils/comgt/files/runcommand.gcom | 26 ++++
> 5 files changed, 247 insertions(+), 1 deletion(-)
> create mode 100644 package/network/utils/comgt/files/ncm.json
> create mode 100644 package/network/utils/comgt/files/ncm.sh
> create mode 100644 package/network/utils/comgt/files/runcommand.gcom
>
> diff --git a/package/network/utils/comgt/Makefile b/package/network/utils/comgt/Makefile
> index 11a1a49..5fccd94 100644
> --- a/package/network/utils/comgt/Makefile
> +++ b/package/network/utils/comgt/Makefile
> @@ -40,6 +40,12 @@ $(call Package/comgt/Default)
> DEPENDS:=+comgt +kmod-usb-serial +kmod-usb-serial-sierrawireless +kmod-usb-net +kmod-usb-net-sierrawireless
> endef
>
> +define Package/comgt-ncm
> +$(call Package/comgt/Default)
> + TITLE+=NCM 3G/4G Support
> + DEPENDS:=+comgt +kmod-usb-serial +kmod-usb-serial-option +kmod-usb-net +kmod-usb-net-cdc-ncm +kmod-usb-net-huawei-cdc-ncm
> +endef
> +
> define Package/comgt/description
> comgt is a scripting language interpreter useful for establishing
> communications on serial lines and through PCMCIA modems as well as GPRS
> @@ -86,5 +92,14 @@ define Package/comgt-directip/install
> $(INSTALL_BIN) ./files/directip.sh $(1)/lib/netifd/proto/directip.sh
> endef
>
> +define Package/comgt-ncm/install
> + $(INSTALL_DIR) $(1)/etc/gcom
> + $(INSTALL_DATA) ./files/ncm.json $(1)/etc/gcom/ncm.json
> + $(INSTALL_DATA) ./files/runcommand.gcom $(1)/etc/gcom/runcommand.gcom
> + $(INSTALL_DIR) $(1)/lib/netifd/proto
> + $(INSTALL_BIN) ./files/ncm.sh $(1)/lib/netifd/proto/ncm.sh
> +endef
> +
> $(eval $(call BuildPackage,comgt))
> $(eval $(call BuildPackage,comgt-directip))
> +$(eval $(call BuildPackage,comgt-ncm))
> diff --git a/package/network/utils/comgt/files/3g.usb b/package/network/utils/comgt/files/3g.usb
> index fd6837e..ac8326b 100644
> --- a/package/network/utils/comgt/files/3g.usb
> +++ b/package/network/utils/comgt/files/3g.usb
> @@ -8,7 +8,7 @@ find_3g_iface() {
>
> local proto
> config_get proto "$cfg" proto
> - [ "$proto" = 3g ] || return 0
> + [ "$proto" = 3g ] || [ "$proto" = ncm ] || return 0
>
> # bypass state vars here because 00-netstate could clobber .device
> local dev=$(uci_get network "$cfg" device)
> diff --git a/package/network/utils/comgt/files/ncm.json b/package/network/utils/comgt/files/ncm.json
> new file mode 100644
> index 0000000..b9b15cd
> --- /dev/null
> +++ b/package/network/utils/comgt/files/ncm.json
> @@ -0,0 +1,49 @@
> +{
> + "huawei": {
> + "initialize": [
> + "AT",
> + "ATZ",
> + "ATQ0",
> + "ATV1",
> + "ATE1",
> + "ATS0=0"
> + ],
> + "modes": {
> + "preferlte": "AT^SYSCFGEX=\\\"030201\\\",3fffffff,2,4,7fffffffffffffff,,",
> + "preferumts": "AT^SYSCFGEX=\\\"0201\\\",3fffffff,2,4,7fffffffffffffff,,",
> + "lte": "AT^SYSCFGEX=\\\"03\\\",3fffffff,2,4,7fffffffffffffff,,",
> + "umts": "AT^SYSCFGEX=\\\"02\\\",3fffffff,2,4,7fffffffffffffff,,",
> + "gsm": "AT^SYSCFGEX=\\\"01\\\",3fffffff,2,4,7fffffffffffffff,,",
> + "auto": "AT^SYSCFGEX=\\\"00\\\",3fffffff,2,4,7fffffffffffffff,,"
> + },
> + "connect": "AT^NDISDUP=1,1,\\\"${apn}\\\"${username:+,\\\"$username\\\"}${password:+,\\\"$password\\\"}${auth:+,$auth}",
> + "disconnect": "AT^NDISDUP=1,0"
> + },
> + "SAMSUNG": {
> + "initialize": [
> + "AT",
> + "AT+CGREG=2",
> + "AT+CFUN=5",
> + "AT+MODESELECT=3",
> + "AT+CGDCONT=1,\\\"IP\\\",\\\"${apn}\\\""
> + ],
> + "modes": {
> + "umts": "AT+CHANGEALLPATH=1"
> + },
> + "connect": "AT+CGATT=1",
> + "disconnect": "AT+CGATT=0"
> + },
> + "Sony": {
> + "initialize": [
> + "AT+CFUN=1",
> + "AT+CGDCONT=1,\\\"IP\\\",\\\"${apn}\\\"",
> + "AT*EIAAUW=1,1,\\\"${username}\\\",\\\"${password}\\\",${auth:-00111}"
> + ],
> + "modes": {
> + "umts": "AT+CFUN=6",
> + "gsm": "AT+CFUN=5"
> + },
> + "connect": "AT*ENAP=1,1",
> + "disconnect": "AT*ENAP=0"
> + }
> +}
> diff --git a/package/network/utils/comgt/files/ncm.sh b/package/network/utils/comgt/files/ncm.sh
> new file mode 100644
> index 0000000..14e421f
> --- /dev/null
> +++ b/package/network/utils/comgt/files/ncm.sh
> @@ -0,0 +1,156 @@
> +#!/bin/sh
> +
> +. /lib/functions.sh
> +. ../netifd-proto.sh
> +init_proto "$@"
> +
> +proto_ncm_init_config() {
> + no_device=1
> + available=1
> + proto_config_add_string "device:device"
> + proto_config_add_string apn
> + proto_config_add_string auth
> + proto_config_add_string username
> + proto_config_add_string password
> + proto_config_add_string pincode
> + proto_config_add_string delay
> + proto_config_add_string mode
> +}
> +
> +proto_ncm_setup() {
> + local interface="$1"
> +
> + local manufacturer initialize setmode connect
> +
> + local device apn auth username password pincode delay mode
> + json_get_vars device apn auth username password pincode delay mode
> +
> + [ -n "$device" ] || {
> + echo "ncm[$$]" "No control device specified"
> + proto_notify_error "$interface" NO_DEVICE
> + proto_set_available "$interface" 0
> + return 1
> + }
> + [ -e "$device" ] || {
> + echo "ncm[$$]" "Control device not valid"
> + proto_set_available "$interface" 0
> + return 1
> + }
> + [ -n "$apn" ] || {
> + echo "ncm[$$]" "No APN specified"
> + proto_notify_error "$interface" NO_APN
> + proto_set_available "$interface" 0
> + return 1
> + }
> +
> + [ -n "$delay" ] && sleep "$delay"
> +
> + manufacturer=`gcom -d "$device" -s /etc/gcom/getcardinfo.gcom | awk '/Manufacturer/ { print $2 }'`
> + [ $? -ne 0 ] && {
> + echo "ncm[$$]" "Failed to get modem information"
> + proto_notify_error "$interface" GETINFO_FAILED
> + proto_set_available "$interface" 0
> + return 1
> + }
> +
> + json_load "$(cat /etc/gcom/ncm.json)"
> + json_select "$manufacturer"
> + [ $? -ne 0 ] && {
> + echo "ncm[$$]" "Unsupported modem"
> + proto_notify_error "$interface" UNSUPPORTED_MODEM
> + proto_set_available "$interface" 0
> + return 1
> + }
> + json_get_values initialize initialize
> + for i in $initialize; do
> + eval COMMAND="$i" gcom -d "$device" -s /etc/gcom/runcommand.gcom || {
> + echo "ncm[$$]" "Failed to initialize modem"
> + proto_notify_error "$interface" INITIALIZE_FAILED
> + proto_set_available "$interface" 0
> + return 1
> + }
> + done
> +
> + [ -n "$pincode" ] && {
> + PINCODE="$pincode" gcom -d "$device" -s /etc/gcom/setpin.gcom || {
> + echo "ncm[$$]" "Unable to verify PIN"
> + proto_notify_error "$interface" PIN_FAILED
> + proto_block_restart "$interface"
> + return 1
> + }
> + }
> + [ -n "$mode" ] && {
> + json_select modes
> + json_get_var setmode "$mode"
> + COMMAND="$setmode" gcom -d "$device" -s /etc/gcom/runcommand.gcom || {
> + echo "ncm[$$]" "Failed to set operating mode"
> + proto_notify_error "$interface" SETMODE_FAILED
> + proto_set_available "$interface" 0
> + return 1
> + }
> + json_select ..
> + }
> +
> + json_get_var connect connect
> + eval COMMAND="$connect" gcom -d "$device" -s /etc/gcom/runcommand.gcom || {
> + echo "ncm[$$]" "Failed to connect"
> + proto_notify_error "$interface" CONNECT_FAILED
> + proto_set_available "$interface" 0
> + return 1
> + }
> +
> + echo "ncm[$$]" "Connected, starting DHCP"
> + proto_init_update "*" 1
> + proto_send_update "$interface"
> +
> + json_init
> + json_add_string name "${interface}_dhcp"
> + json_add_string ifname "@$interface"
> + json_add_string proto "dhcp"
> + json_close_object
> + ubus call network add_dynamic "$(json_dump)"
> +
> + json_init
> + json_add_string name "${interface}_dhcpv6"
> + json_add_string ifname "@$interface"
> + json_add_string proto "dhcpv6"
> + json_close_object
> + ubus call network add_dynamic "$(json_dump)"
> +}
> +
> +proto_ncm_teardown() {
> + local interface="$1"
> +
> + proto_init_update "*" 0
> + proto_send_update "$interface"
> +
> + local manufacturer disconnect
> +
> + local device
> + json_get_vars device
> +
> + echo "ncm[$$]" "Stopping network"
> +
> + manufacturer=`gcom -d "$device" -s /etc/gcom/getcardinfo.gcom | awk '/Manufacturer/ { print $2 }'`
> + [ $? -ne 0 ] && {
> + echo "ncm[$$]" "Failed to get modem information"
> + proto_notify_error "$interface" GETINFO_FAILED
> + return 1
> + }
> +
> + json_load "$(cat /etc/gcom/ncm.json)"
> + json_select "$manufacturer" || {
> + echo "ncm[$$]" "Unsupported modem"
> + proto_notify_error "$interface" UNSUPPORTED_MODEM
> + return 1
> + }
> +
> + json_get_var disconnect disconnect
> + COMMAND="$disconnect" gcom -d "$device" -s /etc/gcom/runcommand.gcom || {
> + echo "ncm[$$]" "Failed to disconnect"
> + proto_notify_error "$interface" DISCONNECT_FAILED
> + return 1
> + }
> +}
> +
> +add_protocol ncm
> diff --git a/package/network/utils/comgt/files/runcommand.gcom b/package/network/utils/comgt/files/runcommand.gcom
> new file mode 100644
> index 0000000..6ba061f
> --- /dev/null
> +++ b/package/network/utils/comgt/files/runcommand.gcom
> @@ -0,0 +1,26 @@
> +# run AT-command from environment
> +opengt
> + set com 115200n81
> + set senddelay 0.02
> + waitquiet 1 0.2
> + flash 0.1
> +
> +:start
> + send "sending -> "
> + send $env("COMMAND")
> + send "^n"
> +
> + waitfor 15 "OK","ERR","ERROR"
> + if % = 0 goto continue
> + if % = 1 goto error
> + if % = 2 goto error
> +
> + print "Timeout running AT-command\n"
> + exit 1
> +
> +:error
> + print "Error running AT-command\n"
> + exit 1
> +
> +:continue
> + exit 0
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list