[OpenWrt-Devel] Q: mac80211: default distance-settings 0
bittorf at bluebottle.com
Tue Oct 7 11:17:40 EDT 2014
* Felix Fietkau <nbd at openwrt.org> [07.10.2014 13:40]:
> On 2014-10-07 08:15, Bastian Bittorf wrote:
> > because 0 seems to be a valid value:
> 0 does not imply dynamic ACK, it is simply the minimum value.
> Enabling dynack by default would be a bad idea.
what does 0 mean? the wiki says: 0 meters away, so a short
ack-timeout is used, or is '0' something special, eg. driver default?
i tested a p2p/longshot here, where both stations are 350m away, but
invoking on both sides:
iw phy phy0 set distance 350
shows, that the link gets really worse, also with 500 or 2000.
can't it be changed during runtime?
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
More information about the openwrt-devel