[OpenWrt-Devel] Q: lantiq pcie and device-tree

[Eddi De Pieri]

Hi,


By comparing the gpio register on original firmware and openwrt I
found that Openwrt have gpio 38 as output, while the original firmware
leave this as gpio input even if i don't configured it as pcie-reset
on dts.

I think that this may damage when porting openwrt on new router board.

There is a explaination on the fact that ifxmips-pcie driver don't use
device-tree yet?

Regards

Eddi
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel