[OpenWrt-Devel] [PATCH 00/10] lantiq - vgv7519 - multiple dts fix and make minipci card visible

[Eddi De Pieri]

Hi maintainers,

As requested I'm trying to send my  patch to the mail list.

Whith these patch I'm able to:
1. get rt2800pci driver to probe the wifi board.
2. leds connected to stp to work again (some changes into openwrt broken them)
3. gphy leds working

Regards


Eddi De Pieri (10):
  lantiq: fix some alt function on pinctrl-xway
  lantiq - vgv7519: fix gphy led configuration (this set correct alt
    function to gpio and let peripherials on pci bus to comes up)
  lantiq - vgv7519: we don't have dual minipci-card so we don't need
    gnt1-req1 for pci handling
  lantiq - vgv7519: we don't have pcie bus so we don't need the reset
    device tree for this board
  lantiq - vgv7519: remove exin definition copied from dev-board dts
  lantiq - vgv7519: add pci-rst entry into dts
  lantiq - vgv7519: fix open-drain configuration for stp
  lantiq - vgv7519: remove spi_cs4, since the board use this line for
    something else
  lantiq - vgv7519: enable pci bus
  lantiq - vgv7519: load rt5362 eeprom from bootloader param patition

 .../etc/hotplug.d/firmware/10-rt2x00-eeprom        |    2 +-
 target/linux/lantiq/dts/VGV7519.dtsi               |   48 +++++++++++---------
 target/linux/lantiq/dts/VGV7519BRN.dts             |    6 +++
 target/linux/lantiq/dts/VGV7519NOR.dts             |    6 +++
 .../patches-3.14/0150-lantiq-pinctrl-xway.patch    |   15 ++++++
 target/linux/lantiq/xrx200/config-3.14             |    2 +-
 6 files changed, 55 insertions(+), 24 deletions(-)
 create mode 100644
target/linux/lantiq/patches-3.14/0150-lantiq-pinctrl-xway.patch

--
1.7.10.4
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel