[OpenWrt-Devel] uqmi - Specifying Link Protocol (libqmi --device-open-net=net-802-3 option)
blogic at openwrt.org
Wed Oct 1 15:21:31 EDT 2014
we noticed that qmi is not working properly today and are working on a fix.
On 01/10/2014 21:12, Spam Catcher wrote:
> I'm trying to use uqmi with a Sierra Wireless MC7354 and MC7750. On
> both modules I'm able to bring up a connection to the cell network, but
> cannot send or receive anything on the wwan0 interface. After much
> digging I found an option for libqmi that specifies using ethernet
> headers instead of raw IP (--device-open-net=net-802-3). When I
> specified this option with libqmi, both modules came up with an IP
> address immediately and allowed traffic to pass without issue. Is there
> an equivalent parameter I can use for uqmi? Or maybe even a compilation
> flag to have it always requested?
> I'll only be using LTE mode, so the firmware bug where 3G and 4G behave
> differently shouldn't affect me (I think). If the functionality's not
> already in uqmi for requesting ethernet headers, then I'd gladly donate
> .25BTC (~ $100) to someone for implementing this.
> Thanks in Advance,
> openwrt-devel mailing list
> openwrt-devel at lists.openwrt.org
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
More information about the openwrt-devel