[OpenWrt-Devel] lantiq usb - isochronous transfers

John Crispin blogic at openwrt.org
Mon Nov 10 03:21:02 EST 2014


there is now a upstream driver for dwc2 usb. i already started using it
on ralink. we should really try to use that one. i am happy to take any
patches though that imporve the current state.

maybe we could also try to port a ifxhcd froma  recent GPL tarball.




On 10/11/2014 09:03, Ben Mulvihill wrote:
> May I ask what the status of isochronous transfer support is
> in the lantiq hcd driver? It was working in Attitude Adjustment
> (at least my usb sound card worked anyway).
> But a lot of changes were made to the driver between AA and BB,
> including new code related to isosynchronous transfers, which are
> now disabled by default (CONFIG_USB_HOST_IFX_WITH_ISO=n).
> Someone else has filed a bug about this:
> 
> https://dev.openwrt.org/ticket/15364
> 
> I tried building a BB image with isochronous transfers enabled,
> but ifxhcd_intr.c failed to compile. The errors look like the
> sorts of careless syntax errors which most people make when
> writing a first version of a new piece of code, and my guess is
> that this bit of code has have never in fact been compiled, let
> alone tested. I have managed to get it to compile by making
> various plausible corrections, but I don't yet have any sound.
> Before I investigate further can you tell me whether it is
> supposed to be working?
> 
> (Below, for reference, are the corrections I have made. But this
> is just an initial attempt, certainly not a patch to be merged.)
> 
> Many thanks,
> 
> Ben Mulvihill
> 
> --- a/package/kernel/lantiq/ltq-hcd/src/ifxhcd_intr.c	2014-11-10 00:31:52.744641266 +0100
> +++ b/package/kernel/lantiq/ltq-hcd/src/ifxhcd_intr.c	2014-11-10 00:25:03.321242453 +0100
> @@ -103,6 +103,10 @@
>  		ifxusb_mreg(&((_hc_regs_)->hcintmsk),0, hcintmsk.d32); \
>  	} while (0)
>  
> +
> +static
> +void init_hc(ifxhcd_epqh_t *_epqh);
> +
>  /*
>   * Save the starting data toggle for the next transfer. The data toggle is
>   * saved in the QH for non-control transfers and it's saved in the QTD for
> @@ -4089,13 +4093,13 @@ void init_hc(ifxhcd_epqh_t *_epqh)
>  				ifxhc->isoc_xact_pos = IFXUSB_HCSPLIT_XACTPOS_ALL;
>  			#endif
>  
> -			_epqh->isoc_frame_index=0;
> +			urbd->isoc_frame_index=0;
>  			_epqh->isoc_now=0;
>  			_epqh->isoc_start_frame=0;
> -			if(_urb->transfer_flags && URB_ISO_ASAP)
> +			if(urb->transfer_flags && URB_ISO_ASAP)
>  				_epqh->isoc_now=1;
>  			else
> -				_epqh->isoc_start_frame=_urb->start_frame;
> +				_epqh->isoc_start_frame=urb->start_frame;
>  			#ifdef __EN_ISOC_SPLIT__
>  				_epqh->isoc_split_pos   =0;
>  				_epqh->isoc_split_offset=0;
> @@ -4296,8 +4300,8 @@ void select_eps_sub(ifxhcd_hcd_t *_ifxhc
>  								list_add_tail(&epqh->ql, &_ifxhcd->epqh_list_isoc);
>  								init_hc(epqh);
>  								epqh->phase=EPQH_ACTIVE;
> -								urbd->phase==URBD_ACTIVE;
> -								epqh->hc.phase=HC_WAITING;
> +								urbd->phase=URBD_ACTIVE;
> +								epqh->hc->phase=HC_WAITING;
>  								ifxhcd_hc_start(_ifxhcd, epqh->hc);
>  							}
>  							break;
> 
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel



More information about the openwrt-devel mailing list