[OpenWrt-Devel] [BUG] NAND sysupgrade broke ubifs on Netgear WNDR3700v4/4300.

Paul Blazejowski paulb at blazebox.homeip.net
Tue Jun 24 16:27:10 EDT 2014


sorry i meant https://dev.openwrt.org/ticket/16803 the previous one is
closed for good ;-)


On Tue, 2014-06-24 at 16:25 -0400, Paul Blazejowski wrote:
> Hi again,
> 
> thanks for the tftp fix, flushing just became so much faster and easier.
> 
> Tested trunk r41336 after your jffs2 fix and the image boots fine,
> restored my configuration changes, rebooted the router and all changes
> are saved now. I will post the working dmesg to the ticket at
> https://dev.openwrt.org/ticket/16840 but it is safe to say that you can
> close it ;-) now.
> 
> Sysupgrade image(s) for 3700v4 and 4300 do not work now, guess this is
> next on the list...
> 
> Thank you,
> -paul
> 
> On Tue, 2014-06-24 at 20:18 +0200, John Crispin wrote:
> > 
> > On 24/06/2014 19:05, Paul Blazejowski wrote:
> > > John,
> > > 
> > > Yes i use the reset with pin and from there i tftp the original
> > > firmware from netgear after that i go to the gui and upload the
> > > open-wrt image because the router will not accept the wndr3700v4
> > > image (there's a cosmetic fix for that, i created a patch that
> > > someone from the forums has sent months ago to this list but it was
> > > never accepted...) https://dev.openwrt.org/ticket/16840
> > > 
> > > With that patch tftp'ing the 
> > > openwrt-ar71xx-nand-wndr3700v4-ubi-factory.img works without need
> > > to flash the original firmware.
> > > 
> > > If there's another method that can be used to flash the image(s)
> > > please let me know i would want to try any alternative ways of
> > > flashing and could learn a thing or two in the process as well ;-)
> > > 
> > > Thank you, -paul
> > 
> > 
> > Hi,
> > 
> > i just pushed the V vs v fix and another fix that removes the jffs2
> > magic. i think this might have been the cause of the problems. please
> > retry with current trunk and let me know if the problem is gone or
> > still there
> > 
> > 	John
> > _______________________________________________
> > openwrt-devel mailing list
> > openwrt-devel at lists.openwrt.org
> > https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel at lists.openwrt.org
> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 198 bytes
Desc: This is a digitally signed message part
URL: <http://lists.infradead.org/pipermail/openwrt-devel/attachments/20140624/9877681c/attachment.sig>
-------------- next part --------------
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel


More information about the openwrt-devel mailing list