[OpenWrt-Devel] [PATCH 00/23] add 3.14 kernel support for ar71xx

[Paul Blazejowski]

no sir! after applying this one liner to my 3.14.13 (instead of the
3.14.12 kernel that Zhao used in his patches) and quick rebuild, my
wndr3700v4 will not boot; it shows 2 steady amber lights...

so this test fails as well ...next one please! ;P

On Sat, 2014-07-26 at 19:49 +0200, Rafał Miłecki wrote:
> On 26 July 2014 16:50, Zhao, Gang <gang.zhao.42 at gmail.com> wrote:
> > On Sat, 2014-07-26 at 22:17:36 +0800, Zhao, Gang wrote:
> >> On Sat, 2014-07-26 at 12:00:21 +0800, Zhao, Gang wrote:
> >>> On Sat, 2014-07-26 at 10:48:35 +0800, Zhao, Gang wrote:
> >>>> Tested on a tp-link wr703n, all seem okay.
> >>>>
> >>> Oh, it seems there are some problems about the phy, all network cards
> >>> are unusable :-( Will investigate it later. At least this patch set made
> >>> a bootable kernel...
> >>>
> >> The problem is it always says "no carrier" even if i plug the cable
> >> between router and my computer.
> >>
> >> [...]
> > [ 2653.640000] br-lan: port 1(eth0) entered disabled state
> >
> > The problem is about bridge. br-lan didn't bring the interface to
> > forwarding mode. Keep going...
> 
> Just guessing (really guessing!): maybe it's similar to the
> http://git.openwrt.org/?p=openwrt.git;a=commitdiff;h=6214350733ad29939ec827d242dbe2e9570ecb87
> ?
> 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 198 bytes
Desc: This is a digitally signed message part
URL: <http://lists.infradead.org/pipermail/openwrt-devel/attachments/20140726/c18a432d/attachment.sig>
-------------- next part --------------
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel