[OpenWrt-Devel] [PATCH 13/23] ar71xx: refresh 452-gpio-add-gpio-latch-driver.patch
Zhao, Gang
gang.zhao.42 at gmail.com
Fri Jul 25 22:48:48 EDT 2014
Signed-off-by: Zhao, Gang <gang.zhao.42 at gmail.com>
---
.../ar71xx/patches-3.14/452-gpio-add-gpio-latch-driver.patch | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/target/linux/ar71xx/patches-3.14/452-gpio-add-gpio-latch-driver.patch b/target/linux/ar71xx/patches-3.14/452-gpio-add-gpio-latch-driver.patch
index 79ef548..3029874 100644
--- a/target/linux/ar71xx/patches-3.14/452-gpio-add-gpio-latch-driver.patch
+++ b/target/linux/ar71xx/patches-3.14/452-gpio-add-gpio-latch-driver.patch
@@ -1,6 +1,6 @@
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
-@@ -725,4 +725,9 @@ config GPIO_NXP_74HC153
+@@ -842,4 +842,9 @@ config GPIO_NXP_74HC153
Platform driver for NXP 74HC153 Dual 4-input Multiplexer. This
provides a GPIO interface supporting input mode only.
@@ -12,11 +12,11 @@
endif
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
-@@ -31,6 +31,7 @@ obj-$(CONFIG_GPIO_IT8761E) += gpio-it876
- obj-$(CONFIG_GPIO_JANZ_TTL) += gpio-janz-ttl.o
+@@ -35,6 +35,7 @@ obj-$(CONFIG_GPIO_JANZ_TTL) += gpio-janz
+ obj-$(CONFIG_GPIO_KEMPLD) += gpio-kempld.o
obj-$(CONFIG_ARCH_KS8695) += gpio-ks8695.o
- obj-$(CONFIG_GPIO_LANGWELL) += gpio-langwell.o
+ obj-$(CONFIG_GPIO_INTEL_MID) += gpio-intel-mid.o
+obj-$(CONFIG_GPIO_LATCH) += gpio-latch.o
+ obj-$(CONFIG_GPIO_LP3943) += gpio-lp3943.o
obj-$(CONFIG_ARCH_LPC32XX) += gpio-lpc32xx.o
obj-$(CONFIG_GPIO_LYNXPOINT) += gpio-lynxpoint.o
- obj-$(CONFIG_GPIO_MAX730X) += gpio-max730x.o
--
1.9.3
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list