[OpenWrt-Devel] [PATCH] [orion] Update kernel to 3.10.44
Hauke Mehrtens
hauke at hauke-m.de
Sun Jul 20 05:20:58 EDT 2014
On 07/20/2014 10:58 AM, Maarten Bezemer wrote:
> Update the kernel of the orion target to version 3.10.44.
> Refresh orion config and patches to match the changes in the kernel
>
> Tested on WRT350N-v2 device.
>
> Signed-off-by: Maarten Bezemer <maarten.bezemer at gmail.com>
> ---
> Makefile | 2 +-
> config-default | 2 ++
> files/arch/arm/mach-orion5x/dt2-setup.c | 2 +-
> patches/200-dt2_board_support.patch | 4 ++--
> patches/210-wn802t_support.patch | 10 +++++-----
> patches/400-fix-section-mismatch-warnings.patch | 22 +---------------------
> patches/a01-dt2-fixes-for-3.3.patch | 2 +-
> 7 files changed, 13 insertions(+), 31 deletions(-)
>
Hi,
I am getting an error when compiling:
/home/hauke/openwrt/git/staging_dir/host/bin/mkfs.jffs2
--compression-mode=none --pad --little-endian --squash -e 64KiB -o
'/home/hauke/openwrt/git/build_dir/target-arm_xscale_uClibc-0.9.33.2_eabi/linux-orion_generic/wn802t-uImage.jffs2'
-d '/home/hauke/openwrt/git/tmp/wn802t_jffs2_uimage'
rm -rf '/home/hauke/openwrt/git/tmp/wn802t_jffs2_uimage'
[ `stat -c %s
'/home/hauke/openwrt/git/build_dir/target-arm_xscale_uClibc-0.9.33.2_eabi/linux-orion_generic/wn802t-uImage.jffs2'`
-le 1048576 ] || { echo ' ERROR:
/home/hauke/openwrt/git/build_dir/target-arm_xscale_uClibc-0.9.33.2_eabi/linux-orion_generic/wn802t-uImage.jffs2
too big (> 1048576 bytes)'; exit 1; }
ERROR:
/home/hauke/openwrt/git/build_dir/target-arm_xscale_uClibc-0.9.33.2_eabi/linux-orion_generic/wn802t-uImage.jffs2
too big (> 1048576 bytes)
make[5]: *** [install] Error 1
You could try to move the ethernet controller and switch driver into a
kernel module to make the kernel image smaller.
Hauke
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list