[OpenWrt-Devel] [PATCH] ramips: add support for Kingston MLW221
L. D. Pinney
ldpinney at gmail.com
Fri Jul 18 19:09:15 EDT 2014
From: L. D. Pinney <ldpinney at gmail.com>
This patch adds support for the Kingston Mobilelite Wireless (MLW-221)
http://wiki.openwrt.org/toh/kingston/mlw221
Signed-off-by: L. D. Pinney <ldpinney at gmail.com>
---
diff --git a/target/linux/ramips/base-files/etc/diag.sh
b/target/linux/ramips/base-files/etc/diag.sh
index 908547e..0887606 100755
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -73,6 +73,9 @@ get_status_led() {
m4)
status_led="m4:blue:status"
;;
+ mlw221)
+ status_led="kingston:green:status"
+ ;;
mofi3500-3gn)
status_led="mofi3500-3gn:green:status"
;;
diff --git a/target/linux/ramips/base-files/etc/uci-defaults/01_leds
b/target/linux/ramips/base-files/etc/uci-defaults/01_leds
index 19ec4f5..359281e 100755
--- a/target/linux/ramips/base-files/etc/uci-defaults/01_leds
+++ b/target/linux/ramips/base-files/etc/uci-defaults/01_leds
@@ -113,6 +113,9 @@ case $board in
hw550-3g)
set_usb_led "hw550-3g:green:usb"
;;
+ mlw221)
+ set_wifi_led "kingston:blue:wifi"
+ ;;
mofi3500-3gn)
set_usb_led "mofi3500-3gn:green:usb"
;;
diff --git a/target/linux/ramips/base-files/etc/uci-defaults/02_network
b/target/linux/ramips/base-files/etc/uci-defaults/02_network
index b54b555..c6a4609 100755
--- a/target/linux/ramips/base-files/etc/uci-defaults/02_network
+++ b/target/linux/ramips/base-files/etc/uci-defaults/02_network
@@ -49,6 +49,10 @@ ramips_setup_interfaces()
ucidef_set_interface_lan "eth0"
;;
+ mlw221)
+ ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+ ;;
+
3g-6200nl | \
wl-330n | \
wmr300)
diff --git a/target/linux/ramips/base-files/lib/ramips.sh
b/target/linux/ramips/base-files/lib/ramips.sh
index f9ab1e3..71cdd47 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -157,6 +157,9 @@ ramips_board_detect() {
*"HAME MPR-A2")
name="mpr-a2"
;;
+ *"Kingston MLW221")
+ name="mlw221"
+ ;;
*"Planex MZK-750DHP")
name="mzk-750dhp"
;;
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh
b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index 8ada58b..5dec7f8 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -54,6 +54,7 @@ platform_check_image() {
ip2202 | \
m3 | \
m4 | \
+ mlw221 | \
mofi3500-3gn | \
mpr-a1 | \
mpr-a2 | \
diff --git a/target/linux/ramips/image/Makefile
b/target/linux/ramips/image/Makefile
index c7225a6..3a0fe9d 100644
--- a/target/linux/ramips/image/Makefile
+++ b/target/linux/ramips/image/Makefile
@@ -737,6 +737,7 @@ endif
# MT7620N Profiles
#
+Image/Build/Profile/MLW221=$(call BuildFirmware/Default16M/$(1),$(1),mlw221,MLW221)
Image/Build/Profile/WMR300=$(call BuildFirmware/Default8M/$(1),$(1),wmr-300,WMR300)
Image/Build/Profile/RT-N14U=$(call BuildFirmware/Default8M/$(1),$(1),rt-n14u,RT-N14U)
Image/Build/Profile/WR8305RT=$(call BuildFirmware/Default8M/$(1),$(1),wr8305rt,WR8305RT)
@@ -745,6 +746,7 @@ Image/Build/Profile/ZBT-WA05=$(call BuildFirmware/Default8M/$(1),$(1),zbt-wa05,Z
ifeq ($(SUBTARGET),mt7620n)
define Image/Build/Profile/Default
+ $(call Image/Build/Profile/MLW221,$(1))
$(call Image/Build/Profile/WMR300,$(1))
$(call Image/Build/Profile/RT-N14U,$(1))
$(call Image/Build/Profile/WR8305RT,$(1))
diff --git a/target/linux/ramips/dts/MLW221.dts
b/target/linux/ramips/dts/MLW221.dts
index e69de29..d91781b 100644
--- a/target/linux/ramips/dts/MLW221.dts
+++ b/target/linux/ramips/dts/MLW221.dts
@@ -0,0 +1,115 @@
+/dts-v1/;
+
+/include/ "mt7620n.dtsi"
+
+/ {
+ compatible = "mlw221", "ralink,mt7620n-soc";
+ model = "Kingston MLW221";
+
+ palmbus at 10000000 {
+ gpio0: gpio at 600 {
+ status = "okay";
+ };
+
+ gpio2: gpio at 660 {
+ status = "okay";
+ };
+
+ gpio3: gpio at 688 {
+ status = "okay";
+ };
+
+ spi at b00 {
+ status = "okay";
+
+ m25p80 at 0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "s25fl129p1";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "s25fl129p1";
+ spi-max-frequency = <10000000>;
+
+ partition at 0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition at 30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition at 40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition at 50000 {
+ label = "firmware";
+ reg = <0x50000 0xf60000>;
+ };
+
+ partition at fb0000 {
+ label = "user-config";
+ reg = <0xfb0000 0x50000>;
+
+ };
+ };
+ };
+ };
+
+ ehci at 101c0000 {
+ status = "okay";
+ };
+
+ ohci at 101c1000 {
+ status = "okay";
+ };
+
+ ethernet at 10100000 {
+ mtd-mac-address = <&factory 0x4>;
+ ralink,port-map = "llllw";
+ };
+
+ wmac at 10180000 {
+ ralink,mtd-eeprom = <&factory 0>;
+ };
+
+ pinctrl {
+ state_default: pinctrl0 {
+ default {
+ ralink,group = "i2c", "ephy", "wled";
+ ralink,function = "gpio";
+ };
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ system {
+ label = "kingston:blue:system";
+ gpios = <&gpio2 3 1>;
+ };
+ wifi {
+ label = "kingston:blue:wifi";
+ gpios = <&gpio3 0 1>;
+ };
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+ reset {
+ label = "reset";
+ gpios = <&gpio0 1 1>;
+ linux,code = <0x198>;
+ };
+ system {
+ label = "system";
+ gpios = <&gpio0 2 1>;
+ linux,code = <0x211>;
+ };
+ };
+};
-------------- next part --------------
A non-text attachment was scrubbed...
Name: mlw221.patch
Type: text/x-diff
Size: 7264 bytes
Desc:
URL: <http://lists.infradead.org/pipermail/openwrt-devel/attachments/20140718/83275699/attachment.bin>
-------------- next part --------------
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list