[OpenWrt-Devel] [PATCH V2][brcm2708] Use uci-defaults for network config

[John Crispin]

Hi,

can you use brcm2708: int he subject next time ?

git am strips [foo] from the subject

	John


On 04/07/2014 14:29, Álvaro Fernández Rojas wrote:
> By using uci-defaults force_link is enabled, which fixes some link
> issues if ethernet cable isn't connected when LAN is initialized.
> 
> Signed-off-by: Álvaro Fernández Rojas <noltari at gmail.com> --- v2:
> check for existing network config as Jonas suggested.
> 
> diff --git a/target/linux/brcm2708/base-files/etc/config/network
> b/target/linux/brcm2708/base-files/etc/config/network deleted file
> mode 100644 index 1d5ded3..0000000 ---
> a/target/linux/brcm2708/base-files/etc/config/network +++
> /dev/null @@ -1,13 +0,0 @@ -# Copyright (C) 2006 OpenWrt.org - 
> -config interface loopback -	option ifname	lo -	option proto
> static -	option ipaddr	127.0.0.1 -	option netmask	255.0.0.0 - 
> -config interface lan -	option ifname	eth0 -	option proto	static -
> option ipaddr	192.168.1.1 -	option netmask	255.255.255.0 diff --git
> a/target/linux/brcm2708/base-files/etc/uci-defaults/02_network
> b/target/linux/brcm2708/base-files/etc/uci-defaults/02_network new
> file mode 100644 index 0000000..e7e35c5 --- /dev/null +++
> b/target/linux/brcm2708/base-files/etc/uci-defaults/02_network @@
> -0,0 +1,15 @@ +#!/bin/sh +# Copyright (C) 2014 OpenWrt.org + +[ -e
> /etc/config/network ] && exit 0 + +touch /etc/config/network + +.
> /lib/functions/uci-defaults.sh + +ucidef_set_interface_loopback 
> +ucidef_set_interface_lan "eth0" + +uci commit network + +exit 0 
> _______________________________________________ openwrt-devel
> mailing list openwrt-devel at lists.openwrt.org 
> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
> 
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel