[OpenWrt-Devel] [PATCH] ramips: add support for WR8305RT board
Jorge Vargas
jorge.vargas at sosvia.com
Fri Jul 4 20:49:04 EDT 2014
Signed-off-by: Jorge Vargas <jorge.vargas at sosvia.com>
---
target/linux/ramips/base-files/etc/diag.sh | 3 +
.../etc/hotplug.d/firmware/10-rt2x00-eeprom | 1 +
.../ramips/base-files/etc/uci-defaults/01_leds | 5 +
.../ramips/base-files/etc/uci-defaults/02_network | 12 +++
.../ramips/base-files/lib/preinit/06_set_iface_mac | 3 +-
target/linux/ramips/base-files/lib/ramips.sh | 3 +
.../ramips/base-files/lib/upgrade/platform.sh | 1 +
target/linux/ramips/dts/WR8305RT.dts | 108 +++++++++++++++++++++
target/linux/ramips/image/Makefile | 2 +
9 files changed, 137 insertions(+), 1 deletion(-)
create mode 100644 target/linux/ramips/dts/WR8305RT.dts
diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index 14d630e..908547e 100755
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -152,6 +152,9 @@ get_status_led() {
wr512-3gn)
status_led="wr512:green:wps"
;;
+ wr8305rt)
+ status_led="wr8305rt:sys"
+ ;;
wnce2001)
status_led="netgear:green:power"
;;
diff --git a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
index b56fb63..e958899 100644
--- a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
+++ b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
@@ -120,6 +120,7 @@ case "$FIRMWARE" in
wnce2001 | \
wr512-3gn | \
wr6202 | \
+ wr8305rt | \
wrtnode | \
mzk-w300nh2 | \
ur-326n4g | \
diff --git a/target/linux/ramips/base-files/etc/uci-defaults/01_leds b/target/linux/ramips/base-files/etc/uci-defaults/01_leds
index c2f768b..c3ae832 100755
--- a/target/linux/ramips/base-files/etc/uci-defaults/01_leds
+++ b/target/linux/ramips/base-files/etc/uci-defaults/01_leds
@@ -181,6 +181,11 @@ case $board in
ucidef_set_led_default "power" "power" "buffalo:green:power" "1"
ucidef_set_led_default "router" "router" "buffalo:green:router" "1"
;;
+ wr8305rt)
+ ucidef_set_led_default "power" "power" "wr8305rt:sys" "1"
+ set_usb_led "wr8305rt:usb"
+ set_wifi_led "wr8305rt:wifi"
+ ;;
esac
ucidef_commit_leds
diff --git a/target/linux/ramips/base-files/etc/uci-defaults/02_network b/target/linux/ramips/base-files/etc/uci-defaults/02_network
index 4eef735..a71ba18 100755
--- a/target/linux/ramips/base-files/etc/uci-defaults/02_network
+++ b/target/linux/ramips/base-files/etc/uci-defaults/02_network
@@ -162,6 +162,13 @@ ramips_setup_interfaces()
ucidef_add_switch_vlan "switch0" "2" "6t"
;;
+ wr8305rt)
+ ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+ ucidef_add_switch "switch0" "1" "1"
+ ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 4 6t"
+ ucidef_add_switch_vlan "switch0" "2" "4 6t"
+ ;;
+
d105 | \
na930 | \
omni-emb-hpm|\
@@ -244,6 +251,11 @@ ramips_setup_macs()
wan_mac=$(macaddr_add "$lan_mac" 1)
;;
+ wr8305rt)
+ lan_mac=$(mtd_get_mac_binary factory 4)
+ wan_mac=$(macaddr_add "$lan_mac" 1)
+ ;;
+
*)
wan_mac=$(macaddr_add "$lan_mac" 1)
;;
diff --git a/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac b/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac
index 8538c13..2a0a4fd 100644
--- a/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac
+++ b/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac
@@ -17,7 +17,8 @@ preinit_set_mac_address() {
w150m | \
mzk-w300nh2 |\
wl-330n |\
- wl-330n3g)
+ wl-330n3g |\
+ wr8305rt)
mac=$(mtd_get_mac_binary factory 4)
ifconfig eth0 hw ether $mac 2>/dev/null
;;
diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index ca339b3..f398275 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -307,6 +307,9 @@ ramips_board_detect() {
*"Sercomm NA930")
name="na930"
;;
+ *"ZBT WR8305RT")
+ name="wr8305rt"
+ ;;
*)
name="generic"
;;
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index a39c433..c1eee00 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -89,6 +89,7 @@ platform_check_image() {
ur-336un |\
wr512-3gn |\
wmr300 |\
+ wr8305rt |\
wrtnode |\
x5 |\
x8)
diff --git a/target/linux/ramips/dts/WR8305RT.dts b/target/linux/ramips/dts/WR8305RT.dts
new file mode 100644
index 0000000..81653f5
--- /dev/null
+++ b/target/linux/ramips/dts/WR8305RT.dts
@@ -0,0 +1,108 @@
+/dts-v1/;
+
+/include/ "mt7620n.dtsi"
+
+/ {
+ compatible = "wr8305rt", "ralink,mt7620n-soc";
+ model = "ZBT WR8305RT";
+
+ palmbus at 10000000 {
+ gpio1: gpio at 638 {
+ status = "okay";
+ };
+ gpio3: gpio at 688 {
+ status = "okay";
+ };
+
+ spi at b00 {
+ status = "okay";
+
+ m25p80 at 0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "mx25l6405d";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "en25q64";
+ spi-max-frequency = <10000000>;
+
+ partition at 0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition at 30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition at 40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition at 50000 {
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+ };
+ };
+
+ ehci at 101c0000 {
+ status = "okay";
+ };
+
+ ohci at 101c1000 {
+ status = "okay";
+ };
+
+ ethernet at 10100000 {
+ mtd-mac-address = <&factory 0x4>;
+ ralink,port-map = "llllw";
+ };
+
+ pinctrl {
+ state_default: pinctrl0 {
+ ephy {
+ ralink,group = "ephy";
+ ralink,function = "ephy";
+ };
+ default {
+ ralink,group = "i2c", "uartf", "spi refclk", "wled";
+ ralink,function = "gpio";
+ };
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ sys {
+ label = "wr8305rt:sys";
+ gpios = <&gpio1 14 1>;
+ };
+ lan {
+ label = "wr8305rt:usb";
+ gpios = <&gpio1 15 1>;
+ };
+ wifi {
+ label = "wr8305rt:wifi";
+ gpios = <&gpio3 0 1>;
+ };
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+ reset {
+ label = "reset";
+ gpios = <&gpio0 1 1>;
+ linux,code = <0x198>;
+ };
+ };
+};
+
diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile
index 5b23035..9f3e225 100644
--- a/target/linux/ramips/image/Makefile
+++ b/target/linux/ramips/image/Makefile
@@ -737,12 +737,14 @@ endif
Image/Build/Profile/WMR300=$(call BuildFirmware/Default8M/$(1),$(1),wmr-300,WMR300)
Image/Build/Profile/RT-N14U=$(call BuildFirmware/Default8M/$(1),$(1),rt-n14u,RT-N14U)
+Image/Build/Profile/WR8305RT=$(call BuildFirmware/Default8M/$(1),$(1),wr8305rt,WR8305RT)
Image/Build/Profile/WRTNODE=$(call BuildFirmware/Default16M/$(1),$(1),wrtnode,WRTNODE)
ifeq ($(SUBTARGET),mt7620n)
define Image/Build/Profile/Default
$(call Image/Build/Profile/WMR300,$(1))
$(call Image/Build/Profile/RT-N14U,$(1))
+ $(call Image/Build/Profile/WR8305RT,$(1))
$(call Image/Build/Profile/WRTNODE,$(1))
endef
endif
--
2.0.1
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list