[OpenWrt-Devel] [brcm2708] Use uci-defaults for network config

[Álvaro Fernández Rojas]

By using uci-defaults force_link is enabled, which fixes some link issues if ethernet cable isn't connected when LAN is initialized.

Signed-off-by: Álvaro Fernández Rojas <noltari at gmail.com>
---
diff --git a/target/linux/brcm2708/base-files/etc/config/network b/target/linux/brcm2708/base-files/etc/config/network
deleted file mode 100644
index 1d5ded3..0000000
--- a/target/linux/brcm2708/base-files/etc/config/network
+++ /dev/null
@@ -1,13 +0,0 @@
-# Copyright (C) 2006 OpenWrt.org
-
-config interface loopback
-	option ifname	lo
-	option proto	static
-	option ipaddr	127.0.0.1
-	option netmask	255.0.0.0
-
-config interface lan
-	option ifname	eth0
-	option proto	static
-	option ipaddr	192.168.1.1
-	option netmask	255.255.255.0
diff --git a/target/linux/brcm2708/base-files/etc/uci-defaults/02_network b/target/linux/brcm2708/base-files/etc/uci-defaults/02_network
new file mode 100644
index 0000000..588fff3
--- /dev/null
+++ b/target/linux/brcm2708/base-files/etc/uci-defaults/02_network
@@ -0,0 +1,11 @@
+#!/bin/sh
+# Copyright (C) 2014 OpenWrt.org
+
+. /lib/functions/uci-defaults.sh
+
+ucidef_set_interface_loopback
+ucidef_set_interface_lan "eth0"
+
+uci commit network
+
+exit 0
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel