[OpenWrt-Devel] [PATCH v2] lantiq: UbinizeImage instead of lantiq-specific ubinize.cfg files

[Ben Mulvihill]

New make target in lantiq to use UbinizeImage and SysupgradeNand.
Only enabled for BTHOMEHUBV2B for the moment but should be useable
for other lantiq nand boards. 

Signed-off-by: Ben Mulvihill <ben.mulvihill at gmail.com>
---

--- a/target/linux/lantiq/image/Makefile	2014-07-02 03:44:34.190125289 +0200
+++ b/target/linux/lantiq/image/Makefile	2014-07-01 21:07:11.466127779 +0200
@@ -12,6 +12,7 @@ include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/image.mk
 
 JFFS2_BLOCKSIZE = 64k 128k 256k
+KDIR_TMP:=$(KDIR)/tmp
 
 LOADER_MAKE := $(NO_TRACE_MAKE) -C lzma-loader KDIR=$(KDIR)
 
@@ -82,6 +83,15 @@ define Image/Build/squashfs
 	$(if $(3),$(call MkBrnImage,$(3),$(4),$(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(3)-brnImage,$(2),$(1),$(5)))
 endef
 
+define Image/BuildNAND/squashfs
+
+ifneq ($($(PROFILE)_UBI_OPTS),)
+	$(call prepare_generic_squashfs,$(KDIR)/root.$(1))
+	$(call Image/Build/UbinizeImage,$(PROFILE),,squashfs,$($(PROFILE)_UBI_OPTS))
+	$(call Image/Build/SysupgradeNAND,$(PROFILE),$(1),$(KDIR)/uImage-$(PROFILE))
+endif
+endef
+
 DGN3500_SKERNEL=0x50000
 DGN3500_SKERNEL_DECIMAL=327680
 define Image/BuildDGN3500/squashfs
@@ -185,6 +195,18 @@ ifneq ($($(PROFILE)_UBI_OPTS),)
 endif
 endef
 
+
+define Image/BuildNAND/ubifs
+
+ifneq ($($(PROFILE)_UBIFS_OPTS),)
+ifneq ($($(PROFILE)_UBI_OPTS),)
+	$(call Image/Build/UbinizeImage,$(PROFILE),,ubifs,$($(PROFILE)_UBI_OPTS))
+	$(call Image/Build/SysupgradeNAND,$(PROFILE),$(1),$(KDIR)/uImage-$(PROFILE))
+endif
+endif
+endef
+
+
 define Image/InstallKernel/Template
 
 ifneq ($(CONFIG_TARGET_ROOTFS_INCLUDE_KERNEL),)
@@ -293,7 +315,7 @@ ifeq ($(CONFIG_TARGET_lantiq_xway),y)
 
 # Danube
 Image/BuildKernel/Profile/BTHOMEHUBV2B=$(call Image/BuildKernel/Template,BTHOMEHUBV2B)
-Image/Build/Profile/BTHOMEHUBV2B=$(call Image/Build/$(1),$(1),BTHOMEHUBV2B)
+Image/Build/Profile/BTHOMEHUBV2B=$(call Image/BuildNAND/$(1),$(1),BTHOMEHUBV2B)
 
 Image/BuildKernel/Profile/EASY50712=$(call Image/BuildKernel/Template,EASY50712)
 Image/Build/Profile/EASY50712=$(call Image/Build/$(1),$(1),EASY50712)
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel