[OpenWrt-Devel] [PATCH] ramips: set default vid of each vlan, so it won't need be set explicitly.

[Roman Yeryomin]

On 1 July 2014 19:12, Сергей Василюгин <vasilugin at yandex.ru> wrote:
>
>
> 01.07.2014, 21:11, "Roman Yeryomin" <leroi.lists at gmail.com>:
>
> On 1 July 2014 13:57, John Crispin <john at phrozen.org> wrote:
>
>  Great,
>
>  Roman can you test / confirm that this fixes the problem on rt-n14 ? i
>  don't have that unit myself so i cannot test.
>
> Yes, it fixes the default configuration.
> But I still don't understand why I cannot change neither vid not member
> ports:
>
> root at OpenWrt:/# swconfig dev switch0 vlan 1 show
> VLAN 1:
>         vid: 1
>         ports: 1 2 3 4 6t
> root at OpenWrt:/# swconfig dev switch0 vlan 1 set ports '3 4 6t'
> root at OpenWrt:/# swconfig dev switch0 vlan 1 show
> VLAN 1:
>         vid: 1
>         ports: 1 2 3 4 6t
>
> So is it broken or what?
> Although I didn't check earlier versions it seems broken to me...
>
> Possibly you miss command
> swconfig dev switch0 set apply
> ???
> On my board vid is changed.

Apparently you didn't read my following post...

Regards,
Roman
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel