[OpenWrt-Devel] [PATCH] ramips: set default vid of each vlan, so it won't need be set explicitly.

[John Crispin]

On 01/07/2014 16:11, Roman Yeryomin wrote:
> On 1 July 2014 13:57, John Crispin <john at phrozen.org> wrote:
>>> Great,
>>> 
>>> Roman can you test / confirm that this fixes the problem on
>>> rt-n14 ? i don't have that unit myself so i cannot test.
> Yes, it fixes the default configuration. But I still don't
> understand why I cannot change neither vid not member ports:
> 
> root at OpenWrt:/# swconfig dev switch0 vlan 1 show VLAN 1: vid: 1 
> ports: 1 2 3 4 6t root at OpenWrt:/# swconfig dev switch0 vlan 1 set
> ports '3 4 6t' root at OpenWrt:/# swconfig dev switch0 vlan 1 show 
> VLAN 1: vid: 1 ports: 1 2 3 4 6t
> 
> So is it broken or what? Although I didn't check earlier versions
> it seems broken to me...
> 

sounds broken, added to my todo list ....
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel