[OpenWrt-Devel] [PATCH] ramips: set default vid of each vlan, so it won't need be set explicitly.

[xfguo at credosemi.com]

Signed-off-by: Xiongfei Guo <xfguo at credosemi.com>
---
 ...8-NET-MIPS-add-ralink-SoC-ethernet-driver.patch | 24 ++++++++++++++--------
 1 file changed, 16 insertions(+), 8 deletions(-)

diff --git a/target/linux/ramips/patches-3.10/0118-NET-MIPS-add-ralink-SoC-ethernet-driver.patch b/target/linux/ramips/patches-3.10/0118-NET-MIPS-add-ralink-SoC-ethernet-driver.patch
index c5d6623..6eb624f 100644
--- a/target/linux/ramips/patches-3.10/0118-NET-MIPS-add-ralink-SoC-ethernet-driver.patch
+++ b/target/linux/ramips/patches-3.10/0118-NET-MIPS-add-ralink-SoC-ethernet-driver.patch
@@ -2814,7 +2814,7 @@ Signed-off-by: John Crispin <blogic at openwrt.org>
 +#endif
 --- /dev/null
 +++ b/drivers/net/ethernet/ralink/mt7530.c
-@@ -0,0 +1,571 @@
+@@ -0,0 +1,579 @@
 +/*
 + * This program is free software; you can redistribute it and/or
 + * modify it under the terms of the GNU General Public License
@@ -2912,15 +2912,15 @@ Signed-off-by: John Crispin <blogic at openwrt.org>
 +	{
 +		.name = "llllw",
 +		.pvids = { 1, 1, 1, 1, 2, 1, 1 },
-+		.members = { 0x6f, 0x50 },
-+		.etags = { 0x40, 0x40 },
-+		.vids = { 1, 2 },
++		.members = { 0, 0x6f, 0x50 },
++		.etags = { 0, 0x40, 0x40 },
++		.vids = { 0, 1, 2 },
 +	}, {
 +		.name = "wllll",
 +		.pvids = { 2, 1, 1, 1, 1, 1, 1 },
-+		.members = { 0x7e, 0x41 },
-+		.etags = { 0x40, 0x40 },
-+		.vids = { 1, 2 },
++		.members = { 0, 0x7e, 0x41 },
++		.etags = { 0, 0x40, 0x40 },
++		.vids = { 0, 1, 2 },
 +	},
 +};
 +
@@ -2961,10 +2961,18 @@ Signed-off-by: John Crispin <blogic at openwrt.org>
 +mt7530_reset_switch(struct switch_dev *dev)
 +{
 +	struct mt7530_priv *priv = container_of(dev, struct mt7530_priv, swdev);
++	int i;
 +
 +	memset(priv->port_entries, 0, sizeof(priv->port_entries));
 +	memset(priv->vlan_entries, 0, sizeof(priv->vlan_entries));
 +
++	/* set default vid of each vlan to the same number of vlan, so the vid
++	 * won't need be set explicitly.
++	 */
++	for (i = 0; i < MT7530_NUM_VLANS; i++) {
++		priv->vlan_entries[i].vid = i;
++	}
++
 +	return 0;
 +}
 +
@@ -3158,7 +3166,7 @@ Signed-off-by: John Crispin <blogic at openwrt.org>
 +	vid = (u16)val->value.i;
 +
 +	if (vlan < 0 || vlan >= MT7530_NUM_VLANS)
-+	    return -EINVAL;
++		return -EINVAL;
 +
 +	if (vid < MT7530_MIN_VID || vid > MT7530_MAX_VID)
 +		return -EINVAL;
-- 
1.9.1
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel