[OpenWrt-Devel] [PATCH] ramips: enable additional GPIOs on HAME MPR-A1

Paul Fertser fercerpav at gmail.com
Sat Aug 9 10:44:22 EDT 2014

On Sat, Aug 09, 2014 at 03:51:17PM +0200, Álvaro Fernández Rojas wrote:
> Since most RT5350 use those LEDs for ethernet and have
> them configured by the bootloader, there's no need in enabling and
> reconfiguring them on all boards.

Do you mean the current gpio driver will reconfigure them somehow even
if they're not enabled in pinctrl? Also (even if so), does it matter
if the pads are still muxed to their functions (and not gpio)?

Be free, use free (http://www.gnu.org/philosophy/free-sw.html) software!
mailto:fercerpav at gmail.com
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org

More information about the openwrt-devel mailing list