[FS#4227] mr8300: no WAN port in switch

[OpenWrt Bugs]

THIS IS AN AUTOMATED MESSAGE, DO NOT REPLY.

A new Flyspray task has been opened.  Details are below. 

User who did this - Julien Cassette (jcassette) 

Attached to Project - OpenWrt/LEDE Project
Summary - mr8300: no WAN port in switch
Task Type - Bug Report
Category - Base system
Status - Unconfirmed
Assigned To - 
Operating System - All
Severity - Medium
Priority - Very Low
Reported Version - openwrt-21.02
Due in Version - Undecided
Due Date - Undecided
Details - Device problem occurs on: Linksys MR8300

Software version: OpenWrt 21.02.1 r16325-88151b8303 / LuCI openwrt-21.02 branch git-21.295.67054-13df80d

Steps to reproduce:
 - navigate to Network -> Switch
 - the WAN port does not appear

Workaround:
 - create a VLAN without the WAN port
 - connect via SSH and edit /etc/config/network
 - add port number 5 in the VLAN
 - reboot


More information can be found at the following URL:
https://bugs.openwrt.org/index.php?do=details&task_id=4227

You are receiving this message because you have requested it from the Flyspray bugtracking system.  If you did not expect this message or don't want to receive mails in future, you can change your notification settings at the URL shown above.