[FS#4226] Package kmod-phy-ath79-usb missing kernel modules.

[OpenWrt Bugs]

THIS IS AN AUTOMATED MESSAGE, DO NOT REPLY.

A new Flyspray task has been opened.  Details are below. 

User who did this - Guybrush Threepwood (guybrush42) 

Attached to Project - OpenWrt/LEDE Project
Summary - Package kmod-phy-ath79-usb missing kernel modules.
Task Type - Bug Report
Category - Base system
Status - Unconfirmed
Assigned To - 
Operating System - All
Severity - High
Priority - Very Low
Reported Version - Trunk
Due in Version - Undecided
Due Date - Undecided
Details - Hi!

I upgraded my DIR-505 to 21.02.1 using openwrt-21.02.1-ath79-generic-dlink_dir-505-squashfs-sysupgrade.bin and found that the USB port wasn't working.

I then reset the device(long pressed the reset button) and the USB port still doesn't work.

Upon investigation I found that the `kmod-phy-ath79-usb` package doesn't contain any kernel modules.(Only 2 text files.)


Supply the following if possible:
 - Device problem occurs on

D-Link DIR-505


 - Software versions of OpenWrt/LEDE release, packages, etc.

BUILD_ID="r16325-88151b8303"
OPENWRT_BOARD="ath79/generic"
OPENWRT_ARCH="mips_24kc"
OPENWRT_TAINTS=""
OPENWRT_DEVICE_MANUFACTURER="OpenWrt"
OPENWRT_DEVICE_MANUFACTURER_URL="https://openwrt.org/"
OPENWRT_DEVICE_PRODUCT="Generic"
OPENWRT_DEVICE_REVISION="v0"
OPENWRT_RELEASE="OpenWrt 21.02.1 r16325-88151b8303"

root at OpenWrt:~# opkg info kmod-phy-ath79-usb
Package: kmod-phy-ath79-usb
Version: 5.4.154-1
Depends: kernel (= 5.4.154-1-79c5dc6db69102eb2943a96b9bec8b63), kmod-usb-core
Status: install ok installed
Architecture: mips_24kc
Installed-Time: 1635066095



 - Steps to reproduce


   root at OpenWrt:~# opkg files kmod-phy-ath79-usb
Package kmod-phy-ath79-usb (5.4.154-1) is installed on root and has the following files:
/etc/modules.d/21-phy-ath79-usb
/etc/modules-boot.d/21-phy-ath79-usb
root at OpenWrt:~# 


 

More information can be found at the following URL:
https://bugs.openwrt.org/index.php?do=details&task_id=4226

You are receiving this message because you have requested it from the Flyspray bugtracking system.  If you did not expect this message or don't want to receive mails in future, you can change your notification settings at the URL shown above.