[FS#3879] Incorrect switch config for TP-Link Archer C2 AC750 (Attachment added)

[OpenWrt Bugs]

THIS IS AN AUTOMATED MESSAGE, DO NOT REPLY.

The following task has a new comment added:

FS#3879 - Incorrect switch config for TP-Link Archer C2 AC750
User who did this - ludwig (luja)

----------
So I played around with it and found that one needs to remove the switch0 config
in /etc/config/network and
to enable vlan on switch0.

I hacked it in an ugly way as I modified /etc/init.d/network to have configure switch0.

Please look at the attached files they also contain some "history" if looking around.

To get a quick and dirty solution, upload my config
backup-Jade-2022-01-02.tar.gz from the archive
and go from there.
The root password is "toor" the wifi password is "rattensommer"
The IP address is 10.42.42.1

Have fun with this cheap router.


----------

One or more files have been attached.

More information can be found at the following URL:
https://bugs.openwrt.org/index.php?do=details&task_id=3879#comment10428

You are receiving this message because you have requested it from the Flyspray bugtracking system.  If you did not expect this message or don't want to receive mails in future, you can change your notification settings at the URL shown above.