[FS#4015] Linksys WRT1900ACS sysupgrade image for 21.02.0 shows warning after upload
OpenWrt Bugs
openwrt-bugs at lists.openwrt.org
Tue Sep 7 22:02:12 PDT 2021
THIS IS AN AUTOMATED MESSAGE, DO NOT REPLY.
A new Flyspray task has been opened. Details are below.
User who did this - Ian Taylor (ianmtaylor1)
Attached to Project - OpenWrt/LEDE Project
Summary - Linksys WRT1900ACS sysupgrade image for 21.02.0 shows warning after upload
Task Type - Bug Report
Category - Base system
Status - Unconfirmed
Assigned To -
Operating System - All
Severity - Low
Priority - Very Low
Reported Version - Trunk
Due in Version - Undecided
Due Date - Undecided
Details -
**Device:**
Model: Linksys WRT1900ACS
Architecture: ARMv7 Processor rev 1 (v7l)
**Software versions:**
Firmware Version: OpenWrt 19.07.7 r11306-c4a6851c72 / LuCI openwrt-19.07 branch git-21.044.30835-34e0d65
Kernel Version: 4.14.221
**Steps to reproduce:**
- Download sysupgrade image, openwrt-21.02.0-mvebu-cortexa9-linksys_wrt1900acs-squashfs-sysupgrade.bin from [[https://openwrt.org/toh/linksys/wrt1900acs|Linksys WRT1900acs page]]. SHA256: 3880d91cdc54e1cb88cdb3123244d5cf85b8a05d64b4206fb0bd6462a6c73f49
- In LuCi interface, go to "Backup / Flash Firmware" page and upload file in the "Flash new Firmware Image" box.
- Get the warning.
**Warning Text:**
"Device linksys,shelby not supported by this image Supported devices: linksys,wrt1900acs armada-385-linksys-shelby linksys,shelby - Image version mismatch: image 1.1, device 1.0. Please wipe config during upgrade (force required) or reinstall. Reason: Config cannot be migrated from swconfig to DSA Image check failed.
The uploaded image file does not contain a supported format. Make sure that you choose the generic image format for your platform."
More information can be found at the following URL:
https://bugs.openwrt.org/index.php?do=details&task_id=4015
You are receiving this message because you have requested it from the Flyspray bugtracking system. If you did not expect this message or don't want to receive mails in future, you can change your notification settings at the URL shown above.
More information about the openwrt-bugs
mailing list