[FS#4103] Meraki MR33 5G radio : cannot maintain high channels (Attachment added)

OpenWrt Bugs openwrt-bugs at lists.openwrt.org
Fri Oct 22 00:44:17 PDT 2021


THIS IS AN AUTOMATED MESSAGE, DO NOT REPLY.

A new Flyspray task has been opened.  Details are below. 

User who did this - Mark Shickell (mash2895) 

Attached to Project - OpenWrt/LEDE Project
Summary - Meraki MR33 5G radio : cannot maintain high channels
Task Type - Bug Report
Category - Base system
Status - Unconfirmed
Assigned To - 
Operating System - All
Severity - Low
Priority - Very Low
Reported Version - Trunk
Due in Version - Undecided
Due Date - Undecided
Details - OpenWrt 19.07.8 r11364-ef56c85848 / LuCI openwrt-19.07 branch git-21.189.23240-7b931da

Name the affected device
Meraki MR33

What does it do that it should not do / what does it not do that it should do
5G Channels statically set (radio0) are ending up dropping to lower channels
Affects other high channels but will zero in on one example, channel 165
Note: Country set to GB

Steps to reproduce
As a test I set radio0 to 165 but in the morning was running on 52

What you have already done to workaround/fix the problem
fix to channel 48

Any additional info you think is important
I can get you one to play with remotely if it helps

One or more files have been attached.

More information can be found at the following URL:
https://bugs.openwrt.org/index.php?do=details&task_id=4103

You are receiving this message because you have requested it from the Flyspray bugtracking system.  If you did not expect this message or don't want to receive mails in future, you can change your notification settings at the URL shown above.



More information about the openwrt-bugs mailing list