[FS#4097] "Fails": setting TxPower to 0,1,2 dBm with mt76 on GL-MT300N-V2 (SoC MT7628N)

[OpenWrt Bugs]

THIS IS AN AUTOMATED MESSAGE, DO NOT REPLY.

The following task has a new comment added:

FS#4097 - "Fails": setting TxPower to 0,1,2 dBm with mt76 on GL-MT300N-V2 (SoC MT7628N)
User who did this - ghmon (ghmon)

----------
Additional observation - on a "FRITZ!Box 7360 V2" with lscpu reported "MIPS 34Kc V5.6" (above system has "MIPS 24KEc V5.5"), OpenWrt 21.02.0-rc4.

Setting txpower here to LuCi with 0,1,2 dBm is also accepted. After setting and "Save and apply" LuCi reports 3 dBm is really set. Might be some relation to the case described above.
----------

More information can be found at the following URL:
https://bugs.openwrt.org/index.php?do=details&task_id=4097#comment10226

You are receiving this message because you have requested it from the Flyspray bugtracking system.  If you did not expect this message or don't want to receive mails in future, you can change your notification settings at the URL shown above.