[FS#4083] kmod-usb-net-rtl8152 resetting

[OpenWrt Bugs]

THIS IS AN AUTOMATED MESSAGE, DO NOT REPLY.

A new Flyspray task has been opened.  Details are below. 

User who did this - Anon (anonopenwrt) 

Attached to Project - OpenWrt/LEDE Project
Summary - kmod-usb-net-rtl8152 resetting
Task Type - Bug Report
Category - Packages
Status - Unconfirmed
Assigned To - 
Operating System - All
Severity - High
Priority - Very Low
Reported Version - openwrt-21.02
Due in Version - Undecided
Due Date - Undecided
Details - Device: FriendlyARM NanoPi R2S
Openwrt version: 21.02
kmod-usb-net-rtl8152 version: 5.4.143-1

Under load the rtl8152 usb->ethernet controller periodically resets, resulting in lost connectivity.


[835268.288485] r8152 4-1:1.0 eth1: Invalid ether addr 00:00:00:00:00:00
[835268.289087] r8152 4-1:1.0 eth1: Random ether addr f6:79:cb:0d:e8:ca
[835268.294377] r8152 4-1:1.0 eth1: Promiscuous mode enabled
[835601.651427] r8152 4-1:1.0 eth1: Tx timeout
[835603.700959] r8152 4-1:1.0 eth1: Tx status -2
[835603.701462] r8152 4-1:1.0 eth1: Tx status -2
[835603.701925] r8152 4-1:1.0 eth1: Tx status -2
[835603.702389] r8152 4-1:1.0 eth1: Tx status -2
[835604.400457] r8152 4-1:1.0 eth1: Invalid ether addr 00:00:00:00:00:00
[835604.401057] r8152 4-1:1.0 eth1: Random ether addr 1a:0c:e4:6e:e6:78
[835604.406427] r8152 4-1:1.0 eth1: Promiscuous mode enabled
[835851.756695] r8152 4-1:1.0 eth1: Tx timeout
[835851.759988] r8152 4-1:1.0 eth1: Tx status -2
[835851.760467] r8152 4-1:1.0 eth1: Tx status -2
[835851.760989] r8152 4-1:1.0 eth1: Tx status -2
[835851.761459] r8152 4-1:1.0 eth1: Tx status -2
[835854.032456] r8152 4-1:1.0 eth1: Invalid ether addr 00:00:00:00:00:00
[835854.033097] r8152 4-1:1.0 eth1: Random ether addr 9e:77:eb:ed:04:55
[835854.038332] r8152 4-1:1.0 eth1: Promiscuous mode enabled
[836203.747280] r8152 4-1:1.0 eth1: Tx timeout
[836205.795765] r8152 4-1:1.0 eth1: Tx status -2
[836205.796251] r8152 4-1:1.0 eth1: Tx status -2
[836205.796710] r8152 4-1:1.0 eth1: Tx status -2
[836205.797173] r8152 4-1:1.0 eth1: Tx status -2
[836206.496453] r8152 4-1:1.0 eth1: Invalid ether addr 00:00:00:00:00:00
[836206.497053] r8152 4-1:1.0 eth1: Random ether addr fe:52:21:ca:fa:03
[836206.502398] r8152 4-1:1.0 eth1: Promiscuous mode enabled
[836561.625738] r8152 4-1:1.0 eth1: Tx timeout
[836563.674078] r8152 4-1:1.0 eth1: Tx status -2
[836563.674565] r8152 4-1:1.0 eth1: Tx status -2
[836563.675030] r8152 4-1:1.0 eth1: Tx status -2
[836563.675493] r8152 4-1:1.0 eth1: Tx status -2
[836564.384455] r8152 4-1:1.0 eth1: Invalid ether addr 00:00:00:00:00:00
[836564.385058] r8152 4-1:1.0 eth1: Random ether addr ba:63:ae:46:69:46
[836564.390679] r8152 4-1:1.0 eth1: Promiscuous mode enabled


Other reports indicate that this is due to a problem with the driver version used by OpenWRT. This problem does not arise in FriendlyWRT.

Additional info: https://github.com/jayanta525/openwrt-nanopi-r2s/issues/5

FriendlyWRT commit to workaround the issue: https://github.com/friendlyarm/rtl8812au/commit/76c3cf81fdc71af4338571b6404beb2ba3835a62

OpenWRT forum issue: https://forum.openwrt.org/t/update-kmod-usb-net-rtl8152-driver-to-avoid-usb-3-0-to-gigabit-lan-issues/65466/38

More information can be found at the following URL:
https://bugs.openwrt.org/index.php?do=details&task_id=4083

You are receiving this message because you have requested it from the Flyspray bugtracking system.  If you did not expect this message or don't want to receive mails in future, you can change your notification settings at the URL shown above.