[FS#4032] Uplink ethernet ports not connecting at gigabit speeds (Ath79)

[OpenWrt Bugs]

THIS IS AN AUTOMATED MESSAGE, DO NOT REPLY.

The following task has a new comment added:

FS#4032 - Uplink ethernet ports not connecting at gigabit speeds (Ath79)
User who did this - Peter Sherman (psherman)

----------
This is what I get with the mii-tool output on my RouterStation Pro for eth0 (my uplink) and eth1 (LAN, not in use right now)

eth0: negotiated 100baseTx-FD, link ok
  registers for MII PHY 4: 
    1000 796d 004d d041 01e1 c1e1 000d 2801
    0000 0000 1000 0000 0000 0000 0000 2000
    0862 7c52 0000 1002 002c 0000 0000 0000
    3200 0000 0000 0000 0000 0000 824e 0000
  product info: vendor 00:13:74, model 4 rev 1
  basic mode:   autonegotiation enabled
  basic status: autonegotiation complete, link ok
  capabilities: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD
  advertising:  100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD
  link partner: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD
root at PandoraVPN:~# mii-tool -v -v -v -v eth1
Using SIOCGMIIPHY=0x8947
eth1: no link
  registers for MII PHY 0: 
    3100 7949 004d d041 0de1 0000 0004 2801
    0000 0200 0000 0000 0000 0000 0000 2000
    0862 0010 0000 0000 002c 0000 0000 0000
    3200 0000 0000 0000 0000 0000 02ee 0000
  product info: vendor 00:13:74, model 4 rev 1
  basic mode:   autonegotiation enabled
  basic status: no link
  capabilities: 1000baseT-FD 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD
  advertising:  1000baseT-FD 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD flow-control

----------

More information can be found at the following URL:
https://bugs.openwrt.org/index.php?do=details&task_id=4032#comment10184

You are receiving this message because you have requested it from the Flyspray bugtracking system.  If you did not expect this message or don't want to receive mails in future, you can change your notification settings at the URL shown above.