[FS#4143] Image check failed TL-WR1043ND v4

OpenWrt Bugs openwrt-bugs at lists.openwrt.org
Sun Nov 21 07:28:44 PST 2021


THIS IS AN AUTOMATED MESSAGE, DO NOT REPLY.

A new Flyspray task has been opened.  Details are below. 

User who did this - M (ms47) 

Attached to Project - OpenWrt/LEDE Project
Summary - Image check failed TL-WR1043ND v4
Task Type - Bug Report
Category - Base system
Status - Unconfirmed
Assigned To - 
Operating System - All
Severity - Low
Priority - Very Low
Reported Version - openwrt-21.02
Due in Version - Undecided
Due Date - Undecided
Details - Device: TPLink TL-WR1043ND(EU)Ver:4.0

The device is running custom-built 19.07.3 (r11182-5af8da3787) openwrt-ar71xx-generic-tl-wr1043nd-v4-squashfs-factory.bin image.

I want to flash custom built 21.02.1 (r16325-88151b8303) openwrt-ath79-generic-tplink_tl-wr1043nd-v4-squashfs-sysupgrade.bin,
but get "Image check failed" error.

Opening this ticket as per https://openwrt.org/docs/guide-user/installation/ar71xx.to.ath79#if_your_device_is_not_supported_by_the_image

The output of sysupgrade looks like this:

# sysupgrade -n /tmp/openwrt-ath79-generic-tplink_tl-wr1043nd-v4-squashfs-sysupgrade.bin
Invalid image, hardware ID mismatch, hw:10430004 00000001 image:10430004 00000000.
Image check failed.

More information can be found at the following URL:
https://bugs.openwrt.org/index.php?do=details&task_id=4143

You are receiving this message because you have requested it from the Flyspray bugtracking system.  If you did not expect this message or don't want to receive mails in future, you can change your notification settings at the URL shown above.



More information about the openwrt-bugs mailing list