[FS#4066] ipq40xx: Switch (ar40xx) freezes
OpenWrt Bugs
openwrt-bugs at lists.openwrt.org
Mon Nov 15 09:54:53 PST 2021
THIS IS AN AUTOMATED MESSAGE, DO NOT REPLY.
The following task has a new comment added:
FS#4066 - ipq40xx: Switch (ar40xx) freezes
User who did this - Polynomdivision (PolynomialDivision)
----------
Example diff
diff -u 1636876105-ethtool\ -S\ lan1.log 1636876125-ethtool\ -S\ lan1.log
--- "1636876105-ethtool -S lan1.log" 2021-11-14 09:57:54.296129780 +0100
+++ "1636876125-ethtool -S lan1.log" 2021-11-14 09:57:54.762796277 +0100
@@ -1,40 +1,40 @@
NIC statistics:
- tx_packets: 37118865
- tx_bytes: 39940635954
+ tx_packets: 37119048
+ tx_bytes: 39940687530
rx_packets: 17896842
rx_bytes: 2765004610
- RxBroad: 618724
+ RxBroad: 618736
RxPause: 0
- RxMulti: 71642
+ RxMulti: 71666
RxFcsErr: 0
RxAlignErr: 0
RxRunt: 0
RxFragment: 0
- Rx64Byte: 81401
- Rx128Byte: 16481482
- Rx256Byte: 266421
- Rx512Byte: 74709
- Rx1024Byte: 147338
- Rx1518Byte: 919906
+ Rx64Byte: 81421
+ Rx128Byte: 16481568
+ Rx256Byte: 266434
+ Rx512Byte: 74718
+ Rx1024Byte: 147342
+ Rx1518Byte: 919914
RxMaxByte: 87542
RxTooLong: 0
- RxGoodByte: 3173218205
+ RxGoodByte: 3173248165
RxBadByte: 0
RxOverFlow: 0
- Filtered: 161894
- TxBroad: 9615221
- TxPause: 15710
- TxMulti: 811563
+ Filtered: 162034
+ TxBroad: 9615315
+ TxPause: 18185
+ TxMulti: 811634
TxUnderRun: 0
- Tx64Byte: 948123
- Tx128Byte: 14871136
- Tx256Byte: 893717
- Tx512Byte: 444792
- Tx1024Byte: 907971
+ Tx64Byte: 950607
+ Tx128Byte: 14871198
+ Tx256Byte: 893747
+ Tx512Byte: 444849
+ Tx1024Byte: 907996
Tx1518Byte: 10961510
TxMaxByte: 14193799
TxOverSize: 0
- TxByte: 39901619727
+ TxByte: 39901830561
TxCollision: 0
TxAbortCol: 0
TxMultiCol: 0
@@ -42,5 +42,5 @@
TxExcDefer: 0
TxDefer: 0
TxLateCol: 0
- RXUnicast: 17368433
- TXunicast: 32778554
+ RXUnicast: 17368537
+ TXunicast: 32778572
rx-counters of the hardware still increase, but interface/host counter does not increase. I suspect some offload failure?
----------
More information can be found at the following URL:
https://bugs.openwrt.org/index.php?do=details&task_id=4066#comment10301
You are receiving this message because you have requested it from the Flyspray bugtracking system. If you did not expect this message or don't want to receive mails in future, you can change your notification settings at the URL shown above.
More information about the openwrt-bugs
mailing list