[FS#3782] TP-Link CPE510 v2 bootloop with 21.02.0-rc1

[OpenWrt Bugs]

THIS IS AN AUTOMATED MESSAGE, DO NOT REPLY.

The following task has a new comment added:

FS#3782 - TP-Link CPE510 v2 bootloop with 21.02.0-rc1
User who did this - apcameron (apcameron)

----------
When it was working the MTD blocks looked as follows and the firmware MTD partition was correctly split. This is not happening now resulting in the boot failure.
[    0.356707] m25p80 spi0.0: gd25q64 (8192 Kbytes)
[    0.361463] 6 fixed-partitions partitions found on MTD device spi0.0
[    0.367971] Creating 6 MTD partitions on "spi0.0":
[    0.372843] 0x000000000000-0x000000020000 : "u-boot"
[    0.378824] 0x000000020000-0x000000030000 : "partition-table"
[    0.385623] 0x000000030000-0x000000040000 : "info"
[    0.391320] 0x000000040000-0x0000007c0000 : "firmware"
[    0.397492] 2 fixed-partitions partitions found on MTD device firmware
[    0.404182] Creating 2 MTD partitions on "firmware":
[    0.409228] 0x000000000000-0x0000001c0000 : "kernel"
[    0.415137] 0x0000001c0000-0x000000780000 : "rootfs"
[    0.420988] mtd: device 5 (rootfs) set to be root filesystem
[    0.426845] 1 squashfs-split partitions found on MTD device rootfs
[    0.433154] 0x000000680000-0x000000780000 : "rootfs_data"
[    0.439461] 0x0000007c0000-0x0000007f0000 : "config"
[    0.445457] 0x0000007f0000-0x000000800000 : "art"
[    0.452421] libphy: Fixed MDIO Bus: probed

----------

More information can be found at the following URL:
https://bugs.openwrt.org/index.php?do=details&task_id=3782#comment9618

You are receiving this message because you have requested it from the Flyspray bugtracking system.  If you did not expect this message or don't want to receive mails in future, you can change your notification settings at the URL shown above.