[FS#3773] [imagebuilder] cannot find proper ltq-vdsl-app for VR200v

[OpenWrt Bugs]

THIS IS AN AUTOMATED MESSAGE, DO NOT REPLY.

A new Flyspray task has been opened.  Details are below. 

User who did this - Arne Wörner (RRIDDICC) 

Attached to Project - OpenWrt/LEDE Project
Summary - [imagebuilder] cannot find proper ltq-vdsl-app for VR200v
Task Type - Bug Report
Category - Toolchain
Status - Unconfirmed
Assigned To - 
Operating System - All
Severity - High
Priority - Very Low
Reported Version - Trunk
Due in Version - Undecided
Due Date - Undecided
Details - Supply the following if possible:
 - AMD A10 trying to build a custom image for TPlink Archer VR200v
 - todays versions
 - Steps:
wget -O /tmp/openwrt.tar.xz -c https://downloads.openwrt.org/snapshots/targets/lantiq/xrx200/openwrt-imagebuilder-lantiq-xrx200.Linux-x86_64.tar.xz
mkdir build
tar xJf /tmp/openwrt.tar.xz -C build
cd build/*
ln -s ../../files .
make image PROFILE="tplink_vr200v" PACKAGES="bash luci ddns-scripts curl bind-host diffutils tcpdump" FILES=files/

This results in this error:
[...]
Downloading https://downloads.openwrt.org/snapshots/packages/mips_24kc/base/logd_2020-10-25-9ef88681-1_mips_24kc.ipk
Unknown package 'ltq-vdsl-app'.
Installing ltq-vdsl-vr9-vectoring-fw-installer (6.8.6-3) to root...
[...]
Collected errors:
* pkg_hash_fetch_best_installation_candidate: Packages for ltq-vdsl-app found, but incompatible with the architectures configured
* opkg_install_cmd: Cannot install package ltq-vdsl-app.
[...]

How can I still build my own image?
I mean: What does openwrt use to build a fresh image? 

-arne

More information can be found at the following URL:
https://bugs.openwrt.org/index.php?do=details&task_id=3773

You are receiving this message because you have requested it from the Flyspray bugtracking system.  If you did not expect this message or don't want to receive mails in future, you can change your notification settings at the URL shown above.