[FS#3681] ramips: mt7601/mt7530 not works autodetection 100Mb speed ethernet link and forced connected gigabit

OpenWrt Bugs openwrt-bugs at lists.openwrt.org
Sat Mar 13 08:26:21 GMT 2021


THIS IS AN AUTOMATED MESSAGE, DO NOT REPLY.

A new Flyspray task has been opened.  Details are below. 

User who did this - solipse (solipse) 

Attached to Project - OpenWrt/LEDE Project
Summary - ramips: mt7601/mt7530 not works autodetection 100Mb speed ethernet link and forced connected gigabit
Task Type - Bug Report
Category - Base system
Status - Unconfirmed
Assigned To - 
Operating System - All
Severity - Low
Priority - Very Low
Reported Version - Trunk
Due in Version - Undecided
Due Date - Undecided
Details - Device Xiaomi Mi Router 4A Gigabit Edition
OpenWrt 21.02-SNAPSHOT r15877-7e1ab3b746
mt7530 mdio-bus:1f wan (uninitialized): PHY [dsa-0.0:04] driver [Generic PHY]
mt7530 mdio-bus:1f wan: configuring for phy/gmii link mode
mt7530 mdio-bus:1f wan: Link is Up - 1Gbps/Full - flow control off

On a four-core ethernet 100Mb cable, it is forcibly connected to 1000Mb and link does not work.

More information can be found at the following URL:
https://bugs.openwrt.org/index.php?do=details&task_id=3681

You are receiving this message because you have requested it from the Flyspray bugtracking system.  If you did not expect this message or don't want to receive mails in future, you can change your notification settings at the URL shown above.



More information about the openwrt-bugs mailing list