[FS#3658] Upgrade from 19.07.6 to 19.07.7 is only working partially

[OpenWrt Bugs]

THIS IS AN AUTOMATED MESSAGE, DO NOT REPLY.

A new Flyspray task has been opened.  Details are below. 

User who did this - arminfuerst (arminfuerst) 

Attached to Project - OpenWrt/LEDE Project
Summary - Upgrade from 19.07.6 to 19.07.7 is only working partially
Task Type - Bug Report
Category - Base system
Status - Unconfirmed
Assigned To - 
Operating System - All
Severity - Medium
Priority - Very Low
Reported Version - openwrt-19.07
Due in Version - Undecided
Due Date - Undecided
Details - This occurred to me when trying to upgrade one of my "TP-Link TL-WR842N/ND v2" from 19.07.6 to 19.07.7.
I used following file to flash through /cgi-bin/luci/admin/system/flash:
https://downloads.openwrt.org/releases/19.07.7/targets/ath79/generic/openwrt-19.07.7-ath79-generic-tplink_tl-wr842n-v2-squashfs-sysupgrade.bin
After the upload, I also checked the checksum:
5e1d205a787e7a698fa228346379d36b3eef9d35507b45137cee544e0e983816

This file seems to contain some kind of partial upgrade. The device is coming up and accessible, but it reports itself as 19.07.6 while using kernel 4.14.221.
Installation of all kernel related modules fail because the opkg/distfeeds.conf references to 19.07.6


More information can be found at the following URL:
https://bugs.openwrt.org/index.php?do=details&task_id=3658

You are receiving this message because you have requested it from the Flyspray bugtracking system.  If you did not expect this message or don't want to receive mails in future, you can change your notification settings at the URL shown above.