[FS#3949] netifd commit 2801fe6132c4e2e364e2d5a304594185351b501b to openwrt 21.02 breaks Linksys switch

[OpenWrt Bugs]

THIS IS AN AUTOMATED MESSAGE, DO NOT REPLY.

A new Flyspray task has been opened.  Details are below. 

User who did this - Mauro Mozzarelli (ezplanet) 

Attached to Project - OpenWrt/LEDE Project
Summary - netifd commit 2801fe6132c4e2e364e2d5a304594185351b501b to openwrt 21.02 breaks Linksys switch
Task Type - Bug Report
Category - Base system
Status - Unconfirmed
Assigned To - 
Operating System - All
Severity - Critical
Priority - Very Low
Reported Version - openwrt-21.02
Due in Version - Undecided
Due Date - Undecided
Details - Supply the following if possible:
 - Device problem occurs on: Linksys WRT32x and Linksys EA 8300
 - Software versions of OpenWrt/LEDE release, packages, etc:
SINCE:
OpenWrt 21.02-SNAPSHOT r16248-089efd61e9 / LuCI openwrt-21.02 branch git-21.196.35996-de8bc46 

 - Steps to reproduce
Just install this latest 21.02 build and boot, the router's switch will connect only port 1, all other ports remain disconnected (reported as no link) despite devices being plugged in.

This is a blocking defect.

   
OpenWRT 21.02 netifd commit 2801fe6132c4e2e364e2d5a304594185351b501b

netifd: update to the latest version
85f01c44a950 bridge: check bridge port vlan membership on link-up events
17e453bd68b4 wireless: add back regular virtual interfaces on hotplug-add events as well

Signed-off-by: Felix Fietkau 


Breaks switch functionality on Linksys WRT 32x and Linksys EA 8300

More information can be found at the following URL:
https://bugs.openwrt.org/index.php?do=details&task_id=3949

You are receiving this message because you have requested it from the Flyspray bugtracking system.  If you did not expect this message or don't want to receive mails in future, you can change your notification settings at the URL shown above.