[FS#3943] dnsmasq-full running in ujail doesn't bind any socket after restarting the service

[OpenWrt Bugs]

THIS IS AN AUTOMATED MESSAGE, DO NOT REPLY.

The following task has been changed.  The changes are listed below.  For full information about what has changed, visit the URL and click the History tab.

FS#3943 - dnsmasq-full running in ujail doesn't bind any socket after restarting the service
User who did this: Stijn Tintel (stintel)
Task details edited:
-------
When a device has been running for a while (hit it today with 28d uptime), restarting dnsmasq results in dnsmasq running but it doesn't bind to a single socket. There are no errors displayed on stdout/stderr while restarting, nor in syslog.


root at ar0:~# /etc/init.d/dnsmasq restart
udhcpc: started, v1.33.1
udhcpc: sending discover
udhcpc: no lease, failing
udhcpc: started, v1.33.1
udhcpc: sending discover
udhcpc: no lease, failing
udhcpc: started, v1.33.1
udhcpc: sending discover
udhcpc: no lease, failing
udhcpc: started, v1.33.1
udhcpc: sending discover
udhcpc: no lease, failing



Tue Jul 20 15:17:15 2021 user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
Tue Jul 20 15:17:15 2021 user.notice dnsmasq: Allowing 127.0.0.0/8 responses
Tue Jul 20 15:17:15 2021 user.notice dnsmasq: Allowing RFC1918 responses for domain plex.direct



root at ar0:~# ps aux | grep dnsmasq
root     21289  0.0  0.0   2088   872 ?        S    15:17   0:00 /sbin/ujail -n dnsmasq -u -l -r /dev/null -r /dev/urandom -r /etc/TZ -r /etc/dnsmasq.conf -r /etc/ethers -r /etc/group -r /etc/hosts -r /etc/passwd -r /sbin/hotplug-call -r /tftpboot -r /tmp/dnsmasq.d -r /tmp/etc/dnsmasq.conf.main -r /tmp/hosts/dhcp.main -r /usr/lib/dnsmasq/dhcp-script.sh -r /usr/share/dnsmasq/dhcpbogushostname.conf -r /usr/share/dnsmasq/rfc6761.conf -r /usr/share/dnsmasq/trust-anchors.conf -w /var/lib/dhcp.leases -w /var/run/dnsmasq/ -- /usr/sbin/dnsmasq -C /tmp/etc/dnsmasq.conf.main -k -x /var/run/dnsmasq/dnsmasq.main.pid
root     21455  0.0  0.0   1132   468 pts/1    S+   15:19   0:00 grep dnsmasq
root at ar0:~# ss -anput | grep dnsmasq
root at ar0:~#


Commenting out the 3 lines in the init script starting with procd_add_jail and then restarting the service solves the problem. The problem also does not occur when dnsmasq is started during boot.

I've seen this problem before, mentioned it a few times on IRC, the first time was in October 2020, so before 21.02 was branched, so it's very likely this problem exists there as well.
-------

More information can be found at the following URL:
https://bugs.openwrt.org/index.php?do=details&task_id=3943

You are receiving this message because you have requested it from the Flyspray bugtracking system.  If you did not expect this message or don't want to receive mails in future, you can change your notification settings at the URL shown above.