[FS#3937] MR32 BCM53xx boot error

[OpenWrt Bugs]

THIS IS AN AUTOMATED MESSAGE, DO NOT REPLY.

A new Flyspray task has been opened.  Details are below. 

User who did this - tbilan (tbilan) 

Attached to Project - OpenWrt/LEDE Project
Summary - MR32 BCM53xx boot error
Task Type - Bug Report
Category - Base system
Status - Unconfirmed
Assigned To - 
Operating System - All
Severity - Medium
Priority - Very Low
Reported Version - openwrt-21.02
Due in Version - Undecided
Due Date - Undecided
Details - I have an MR32 I'm trying to flash.  Following the instructions on https://openwrt.org/toh/meraki/mr32 I uploaded the initramfs successfully to part.safe.  When rebooting the console has the following errors then boots back into the Meraki firmware:

[    4.690000] Mapping 10362880 bytes for /dev/mtdblock/part.safe
[    4.730000] find_itb_subimage: error finding kernel at 1: FDT_ERR_NOTFOUND
[    4.740000] find_itb_subimage: error finding ramdisk at 1: FDT_ERR_NOTFOUND
[    4.750000] find_itb_subimage: error finding fdt at 2: FDT_ERR_NOTFOUND
[    4.750000] kexec_raw: kexec_load: Cannot assign requested address
[    6.490000] Mapping 10235904 bytes for /dev/mtdblock/part.old
[    6.530000] Meraki-build is 23-191963

I built the initramfs from the current git master (7/18/2021).  I also had someone on #openwrt-dev build it and I tried theirs and received the same errors.



 

More information can be found at the following URL:
https://bugs.openwrt.org/index.php?do=details&task_id=3937

You are receiving this message because you have requested it from the Flyspray bugtracking system.  If you did not expect this message or don't want to receive mails in future, you can change your notification settings at the URL shown above.