[FS#3922] How to Use Microsoft's Remote Desktop Connection?

[OpenWrt Bugs]

THIS IS AN AUTOMATED MESSAGE, DO NOT REPLY.

A new Flyspray task has been opened.  Details are below. 

User who did this - Techy support (Techy0001) 

Attached to Project - OpenWrt/LEDE Project
Summary - How to Use Microsoft's Remote Desktop Connection?
Task Type - Bug Report
Category - Base system
Status - Unconfirmed
Assigned To - 
Operating System - All
Severity - Low
Priority - Very Low
Reported Version - Trunk
Due in Version - Undecided
Due Date - Undecided
Details - Supply the following if possible:
 - Device problem occurs on
 - Software versions of OpenWrt/LEDE release, packages, etc.
 - Steps to reproduce
   

 How to Use Microsoft's Remote Desktop Connection?
Set up the PC you need to associate with so it permits far off associations: 

•	Ensure you have Windows 10 Pro. To check, go to Start > Settings > System > About and search for Edition. For information on the best way to get it, go to Upgrade Windows 10 Home to Windows 10 Pro. 

•	At the point when you're prepared, select Start > Settings > System > Remote Desktop, and turn on Enable Remote Desktop. 

•	Make note of the name of this PC under How to interface with this PC. You'll require this later. 

Utilize Remote Desktop to associate with the PC you set up: 

•	On your neighborhood Windows 10 PC: In the hunt box on the taskbar, type Remote Desktop Connection, and afterward select Remote Desktop Connection. In Remote Desktop Connection, type the name of the PC you need to interface with (from Step 1), and afterward select Connect. 

•	On your Windows, Android, or iOS gadget: Open the Remote Desktop application (accessible for nothing from Microsoft Store, Google Play, and the Mac App Store), and add the name of the PC that you need to associate with (from Step 1). Select the distant PC name that you added, and afterward trust that the association will finish.


•	https://www.techysupport.co/steps-for-aka-ms-remote-connect/


More information can be found at the following URL:
https://bugs.openwrt.org/index.php?do=details&task_id=3922

You are receiving this message because you have requested it from the Flyspray bugtracking system.  If you did not expect this message or don't want to receive mails in future, you can change your notification settings at the URL shown above.