[FS#3906] No wifi on ZyXEL P2812HNU-F1

[OpenWrt Bugs]

THIS IS AN AUTOMATED MESSAGE, DO NOT REPLY.

The following task has a new comment added:

FS#3906 - No wifi on ZyXEL P2812HNU-F1 
User who did this - anonymous (Mijzelf)

----------
I tried snapshot, which had the same problem. Yet I found a work-around to get wifi up:
echo 1 > /sys/bus/pci/rescan

root at OpenWrt:/# echo 1 > /sys/bus/pci/rescan 
[   81.537813] pci 0000:00:0e.0: [1814:3062] type 00 class 0x028000
[   81.542528] pci 0000:00:0e.0: reg 0x10: [mem 0xffff0000-0xffffffff]
[   81.551932] pci 0000:00:0e.0: BAR 0: assigned [mem 0x18000000-0x1800ffff]
[   81.557627] rt2800pci 0000:00:0e.0: enabling device (0000 -> 0002)
[   81.563800] ieee80211 phy0: rt2x00lib_request_eeprom_file: Info - Loading EEPROM data from 'RT3062.eeprom'.
[   81.574132] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3572, rev 0223 detected
[   81.581156] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0008 detected
root at OpenWrt:/# 


Adding it to /etc/rc.local seems to be early enough to get wifi configured on boot.
----------

More information can be found at the following URL:
https://bugs.openwrt.org/index.php?do=details&task_id=3906#comment9896

You are receiving this message because you have requested it from the Flyspray bugtracking system.  If you did not expect this message or don't want to receive mails in future, you can change your notification settings at the URL shown above.